EDIY Pigtails needed?

[forvrknight]

Never got the pigtails with my truck and while I have reached out to my dealer/parts they can't find any. I've tried the part number from some of the pictures and get an error when searching. Do I have to use the pigtails or can I snip the connector off and join right to the wires? Anyone know?

Sponsored

 

[HD676]

Check under your rear seat, or behind it. Mine was in a plastic bag in my under seat storage.

 

[forvrknight]

Check under your rear seat, or behind it. Mine was in a plastic bag in my under seat storage.

I'll check again but I've looked before. Mine just didn't have one that I could find.

 

[Stimpy433]

Mine was in the glove box….

 

[PanchoBarrancas]

Mine (only got one) was in the storage bin under the rear seats as well, however I am 99% certain that these ford speaker adapters are the exact same plug as the pigtails. I bought a pair for my speaker swap and noticed the similarity to the pigtail, compared side by side and the connector seems identical.

 

[SkeeterB]

I found my pigtail after I cut the wires and installed my 12v socket in the bed.

 

[OleFordGuy]

Never got the pigtails with my truck and while I have reached out to my dealer/parts they can't find any. I've tried the part number from some of the pictures and get an error when searching. Do I have to use the pigtails or can I snip the connector off and join right to the wires? Anyone know?

Best I can tell "maybe" the Female Plug already in the bed appears to be the one below - but I'm striking out trying to find the Male pigtail counterpart:

WPT-984
Ford Genuine 3U2Z-14S411-BXAB Wire Assembly
https://www.fordservicecontent.com/pubs/content/connectors/images/connectorcatalog.pdf

 

[Decayed]

Mine (only got one) was in the storage bin under the rear seats as well, however I am 99% certain that these ford speaker adapters are the exact same plug as the pigtails. I bought a pair for my speaker swap and noticed the similarity to the pigtail, compared side by side and the connector seems identical.

Worth a try for six bucks. Worst that can happen is you return them.

 

[HD676]

This is the label off of the bag my pigtail was in.

 

[Hizzy8122]

I didn't find mine either. Just spliced and soldered in with shrink wrap

 

[KimTexas]

You only get one from what I understand and mine was and is still in the glove box. You can order them from Ford

 

[dogie rider]

Best I can tell "maybe" the Female Plug already in the bed appears to be the one below - but I'm striking out trying to find the Male pigtail counterpart:

WPT-984
Ford Genuine 3U2Z-14S411-BXAB Wire Assembly
https://www.fordservicecontent.com/pubs/content/connectors/images/connectorcatalog.pdf

The connector on the pigtail isn't the Motorcraft WPT-984, but rather a Molex series MX150 (P/N 34675-0001). I haven't found one for sale individually yet.

 

[forvrknight]

I found my pigtail after I cut the wires and installed my 12v socket in the bed.

This is what I was trying earlier but I'm not getting any power so I thought maybe you have to use the pigtail for some reason.

You only get one from what I understand and mine was and is still in the glove box. You can order them from Ford

I actually tried finding them on the parts site and get an obsolete part message. My parts guy at the dealership can't find it either.

 

[93nighthawk]

Ford PN is NZ6Z 14A318 M , there is no Motorcraft number for it.

 

[OleFordGuy]

Ran across this info for part # NZ6T-12663 which is a different part # from NZ6Z 14A318 M
See below:
https://www.mavericktruckclub.com/f...is-wire-in-the-glove-box-what-is-it-for.4122/

Item for sale on Ebay: https://www.ebay.com/itm/265504799977

Sponsored