- Joined
- May 3, 2025
- Threads
- 2
- Messages
- 101
- Reaction score
- 182
- Location
- The Disputed Lands
- Vehicle(s)
- '25 XLT
- Engine
- 2.5L Hybrid
For critical safety related attachments, the fastener torque installation data is usually recorded by the assembly tooling controllers for each VIN. Data can be retrieved to determine the torque/angle (rotational angle while tightening) installation for each of these attachments. The bolt is like a spring that is stretched in order to provide the necessary clamp load to prevent loosening.4,653 vehicles.
across 5 years and two platforms.
A) that's a pretty specific number.
B) how do they know that is the number
C) how do they know which ones?
It's as if they know it's only the days "Bob" was covering extra shifts for "Jose" over 5 years, and "Bob" did it wrong.
So if, for example, they find loose bolts or some failures later on some units, they can go back and look at all units built during a certain time period and possibly determine which exact units had bolts that were installed incorrectly due to a tooling malfunction or an operator/process issue.
https://www.norbar.in/News-Events/Blog/ArticleID/65/Torque-Angle-Explained
Sponsored
Last edited: