I also have a '24 Lariat w/ a keypad and don't know the code. I know about the tag w/ the code by the fuse box and I haven't looked for it yet because of the crappy weather we're having. I will try the method shown on the above video to see if I can get that to work for me. Anyway, I do have a question; the keypads I've seen on Mavericks have it mounted vertically beside the driver's window, however mine is mounted horizontally between the door handle and the bottom of the window. I'm pretty sure it was dealer installed. Where is yours mounted?
Those only come on the 22s and 23s, they removed that keypad from the door pillar in 24. So dumb on Fords part.
I wasn't sure where the cutoff point was, our test vehicles lost them on 2023. I know the wiring wasn't removed for a while, if at all, so the pillar keypad can be added onto 2024's not sure about 2025. Of course you'd definitely want to check.
You'll need Forscan to activate the function in the BCM, and while you're at it you can add the option to the Sync screen to be able to program a personal code from there (the OEM way). The options are found in the easy mode of Forscan programming for the BCM portion, I don't know about the APIM part. Very easy to do.
Good to know, I already have forscan, do you know what setting and where needs to be enabled? Used it on every Ford I've owned, 5 now.
Interesting. I hadn't seen any pix of a Maverick w/ one mounted horizontally and the '24 CPR Lariat I almost bought also had a keypad mounted vertically, so when I went to look at the one I got I was surprised to see it mounted above the door handle. (Now I've got to get it working!)
Alot of "dumb" people don't want it and didn't feel they should pay for it, Bronco is the same way.Those only come on the 22s and 23s, they removed that keypad from the door pillar in 24. So dumb on Fords part.
Unlike a smooth painted surface. The plastic has texture to it. The keypad should remove easier, when the time comes to replace the battery.mounted mine on the plastic facade of the C-Pillar Buttress... It's flat there for maximum adhesion and the metal in front of it sits a bit higher, so airstream flows over the keypad (should eliminate it being lifted off by the wind)...
