Did the supplied connectors work with that plug? or did you just cut/splice into the wire?I did not use the switch. I used the C206 connector in the A pillar pin 9. Below is the 2025 wiring diagram.
![]()
![]()
Thanks
Sponsored
Did the supplied connectors work with that plug? or did you just cut/splice into the wire?I did not use the switch. I used the C206 connector in the A pillar pin 9. Below is the 2025 wiring diagram.
![]()
![]()
I soldered in a Deutsch connector instead. I was messing with the pin and it didn't want to work and I ran out of patience.Did the supplied connectors work with that plug? or did you just cut/splice into the wire?
Thanks
Thanks. I am planning my install.I soldered in a Deutsch connector instead. I was messing with the pin and it didn't want to work and I ran out of patience.
Im doing this install and im kinda stuck, im on page 8 and the 26 pin connector where you have to remove pin 13, my truck has the 26 pin connector but there is no pin 13… its just not there. I was wondering if you had this problem or anyone else. I contacted ford support and sent pictures but even the guy had no clue why there was no pin 13.I just came across the Ranger Upfitter Switches for what I believe will replace the sunglasses cover in the overhead console. I know the Ranger has the same overhead console as the Maverick and Mustang. Just wondering if anyone else has installed these. I just ordered mine for my tremor. I was originally going with GM switches, but I prefer the stock OEM look.
UPDATE: The kit does fit the Maverick. Just need to accommodate for the illumination wire tap.
![]()
Ford Accessories - Ranger Switches
Updated with installed look:
Very happy with the kit. The gray is only a very slight shade darker than the Maverick. The kit is great. Includes everything you need. Just have to accommodate for the switch illumination tap.
Below are the installation instructions
![]()
That wiring is for the Ranger. I just tapped the illumination wire in the a pillar. See post #44 For 2025 Mavericks it is the Violet-gray wire pin 9. I did not use the supplied pin, I just soldered my own connector to the wire, but you could just get away with a tap if you had to.Im doing this install and im kinda stuck, im on page 8 and the 26 pin connector where you have to remove pin 13, my truck has the 26 pin connector but there is no pin 13… its just not there. I was wondering if you had this problem or anyone else. I contacted ford support and sent pictures but even the guy had no clue why there was no pin 13.
![]()
Im doing the install on a 25 ranger, could I do the same thing? Or what would be the best option for me?That wiring is for the Ranger. I just tapped the illumination wire in the a pillar. See post #44 For 2025 Mavericks it is the Violet-gray wire pin 9. I did not use the supplied pin, I just soldered my own connector to the wire, but you could just get away with a tap if you had to.
yes, you're just tapping into the illumination circuit. I would verify the wire color first incase, that it's a violet/grey. It will be common to all the illuminated switches in the truck.Im doing the install on a 25 ranger, could I do the same thing? Or what would be the best option for me?
My problem is there is no violet/grey wire. It seems to be missingyes, you're just tapping into the illumination circuit. I would verify the wire color first incase, that it's a violet/grey. It will be common to all the illuminated switches in the truck.
I would recommend then, either check on the ranger forum if someone can give you the lighting wiring diagram for your year Ranger or go to the Ford Motorcraft website and pay to download the diagrams to help you.My problem is there is no violet/grey wire. It seems to be missing
![]()
Mine is a 2025. Does yours have the sun roof then?Nice option, thanks. However, my '25 XLT does not have a sunglasses holder. Alternative suggestions?