Scale Suspension Coilovers for 2022+ Ford Maverick [installed photos added]

[2016BoostedGreyGoose]

Have the low version on order for fwd. curious to see the difference in ride from the H&R springs to these. Current setup is still pretty bouncy so firm will be ok in my eyes. Will post an update once installed.

Maybe the fwd springs are different from the awd springs but atm I prefer the ride quality of the H&R springs. Not bouncy at all. Firm as in sports car ride but not bouncy at all. I think you may be unpleasantly surprised by the ride quality of the low version coils...specifically the fronts. Please do report back. Hoping for a better outcome for you though.

Sponsored

 

[Vtec87pr1]

I can put two fingers between frame and control arm.

Oh damn mine its really high the springs lol like i got a long way more to drop

 

[Vtec87pr1]

I asked them about the spring rate they said for the low version thats the one they offer cause how low the truck becomes from the fender liner

 

[Vtec87pr1]

Reasson why i dont want to do more lower its because i deleted the mufflers my self and i will need to modify the pipe on around the diff

 

[Nickd]

Maybe the fwd springs are different from the awd springs but atm I prefer the ride quality of the H&R springs. Not bouncy at all. Firm as in sports car ride but not bouncy at all. I think you may be unpleasantly surprised by the ride quality of the low version coils...specifically the fronts. Please do report back. Hoping for a better outcome for you though.

Hope so as well. Out of curiosity what are your wheel specs? I’m running a 20x8.5 +35 with a 245/45/20 tire. Hoping to be able to go as low as possible up front without rubbing

 

[volksnuts]

Hope so as well. Out of curiosity what are your wheel specs? I’m running a 20x8.5 +35 with a 245/45/20 tire. Hoping to be able to go as low as possible up front without rubbing

I’m running those specs and I’ve go no rubbing…. Only slight brush on the liner when a hard hit bottoms it out

 

[Nickd]

I’m running those specs and I’ve go no rubbing…. Only slight brush on the liner when a hard hit bottoms it out

Thanks for the feedback. Hoping you were going to suggest running a custom billet wheel with higher offset! Lol

 

[2016BoostedGreyGoose]

Hope so as well. Out of curiosity what are your wheel specs? I’m running a 20x8.5 +35 with a 245/45/20 tire. Hoping to be able to go as low as possible up front without rubbing

22x9 255/30/22 Michelin Pilot Sport S4

 

[Vtec87pr1]

Well i think i got it adjusted decent enough that rides better . Still bouncy but stable enough on high speed lol low speed. You guys dont think it could be a pre load situation?

 

[2016BoostedGreyGoose]

Well i think i got it adjusted decent enough that rides better . Still bouncy but stable enough on high speed lol low speed. You guys dont think it could be a pre load situation?

I considered preload ONLY because mine came preloaded by Scales and since I didn't set the preload, I have no idea what they set it at. I verified that it was preload set by contacting them. They said they started preloading the fronts because many didn't set it correctly or at all. I dunno

 

[2016BoostedGreyGoose]

Well i think i got it adjusted decent enough that rides better . Still bouncy but stable enough on high speed lol low speed. You guys dont think it could be a pre load situation?

What are your current setting? My fronts are now at 16 lol

 

[Vtec87pr1]

What are your current setting? My fronts are now at 16 lol

The damper adjustment i started 12 clicks i belive i went down 6 lol but i got to make sure cause i didn't check on what settings they where at . So i will doble check later on today .

 

[Vtec87pr1]

I considered preload ONLY because mine came preloaded by Scales and since I didn't set the preload, I have no idea what they set it at. I verified that it was preload set by contacting them. They said they started preloading the fronts because many didn't set it correctly or at all. I dunno

The front i put the same size of the spaner wrench on preload . I put them first just touching the spring then adjusted the upper lock ring until i seen a gap big enough to the size of the spaner wrench then i thight it with the lower lock ring

 

[2016BoostedGreyGoose]

The front i put the same size of the spaner wrench on preload . I put them first just touching the spring then adjusted the upper lock ring until i seen a gap big enough to the size of the spaner wrench then i thight it with the lower lock ring

When preloading measure the spring itself uncompressed 1st, then set preload. I recommend 5mm is more than enough for a road car. They suggest between 5 and 10mm.

So if spring measures 200mm, after proper preload it should measure 195mm.

 

[volksnuts]

I maybe should be a little more scientific on my preload
Will have to check that

Sponsored