- Thread starter
- #1
Anyone install one yet on a non tow package 25my?
Sponsored
It has a hitch, had to modify the connectors to get them to plug into each other and having an issue with the bottom turn signal bulb not working.It fits 2025 (same tail lights as 22-24), but you need a hitch to mount the hitch light.
If you have 360 and BLISSNot on a '25, but I just installed one on my '24 Tremor. "Tow" or "Non-Tow" won't make a difference; it plugs into the taillight harnesses. Works awesome, very bright.
Modify the connectors? I do not see them listing 2025's yet for the hitch light. Did you contact them before ordering, or just decide to take a chance?It has a hitch, had to modify the connectors to get them to plug into each other and having an issue with the bottom turn signal bulb not working.
Are you saying that the key was wrong on the connectors? If I recall correctly, it should be [EDIT: for 2022-2024 only] Key C, which is a medium gray housing color. If the key was wrong, please shoot DD an email and let them know.It has a hitch, had to modify the connectors to get them to plug into each other and having an issue with the bottom turn signal bulb not working.
It does not. It taps into the tail lights, which bypasses the automatic trailer detection at the hitch connector.If you have 360 and BLISS
Does the hitch light disable the Bliss system?
They keys were just slightly off on both sides preventing it from sliding together. I filled them off and it snapped right together. Was thinking bulb could just be out from doing the install. I contacted dd and they said the 25 wasn't a sure fit.Are you saying that the key was wrong on the connectors? If I recall correctly, it should be Key B, which is a light gray housing color. If the key was wrong, please shoot DD an email and let them know. I don't work there anymore, but it still bothers me when they let their suppliers mess up.
Both tail light bulbs are powered by the same wire at the connector, so that is 100% a coincidence. It's likely a bad bulb.
![]()
It does not. It taps into the tail lights, which bypasses the automatic trailer detection at the hitch connector. The tail lights did not change for 2025.
Took a chance since everything looked to carry over from the 24sModify the connectors? I do not see them listing 2025's yet for the hitch light. Did you contact them before ordering, or just decide to take a chance?
HRG
Like Sticks mentioned, what color are the '25 connectors? Like these?They keys were just slightly off on both sides preventing it from sliding together. I filled them off and it snapped right together. Was thinking bulb could just be out from doing the install. I contacted dd and they said the 25 wasn't a sure fit.
YepLike Sticks mentioned, what color are the '25 connectors? Like these?
HRG
![]()
Thanks. I wonder if DD sourced non-Molex housings for their cable?
Looking at old pictures of the connectors, it should be Key C -- medium gray color. I corrected my original comment. HRG's picture should be correct.Are you saying that the key was wrong on the connectors? If I recall correctly, it should be [EDIT] Key C, which is a medium gray housing color. If the key was wrong, please shoot DD an email and let them know.
No because it plugs into the taillight wiring harness not the trailer wiring.If you have 360 and BLISS
Does the hitch light disable the Bliss system?
BooyahAre you saying that the key was wrong on the connectors? If I recall correctly, it should be [EDIT] Key C, which is a medium gray housing color. If the key was wrong, please shoot DD an email and let them know. I don't work there anymore, but it still bothers me when they let their suppliers mess up.
Both tail light bulbs are powered by the same wire at the connector, so that is 100% a coincidence. It's likely a bad bulb.
![]()
It does not. It taps into the tail lights, which bypasses the automatic trailer detection at the hitch connector. The tail lights did not change for 2025.