Any other console vault owners?

[Mav]

I was hoping Locker down would have one available (I have one in my Tundra), but this looks like the only option for now. I'm not sure why they made the opening so small.

Was yours installed from the factory? It looks like yours flips back to open while the Ford pics show it flipping forward.

Yeah I believe it was installed by the factory. I do wish the opening was wider.

Sponsored

 

[Mymaverick2021]

I’m glad I decided to get this. It’s very well built. The only potential drawback is the size of the opening. It’s just big enough to fit a P365XL. I’m not sure my full sized VP9 would fit.
Who else got one? What do you think?

Well as posted to other inquiries about the size! Ford also has one for under the rear seat (which is much bigger) and with their employe discount can be had for$338.00 the center console 1 seems to be a waste of money

 

[Sylvester]

Are there any alternative part numbers from other ford models which will fit in the back of the truck?

 

[clavicus]

Yeah I believe it was installed by the factory. I do wish the opening was wider.

These are installed at the dealership actually fwiw. Ships with the box inside the truck to be installed by dealer.

 

[Johnkn]

Anyone else have one installed? Any pics with your firearms are appreciated. I just ordered direct from Console Vault. The pic shown here looks like a 365 (XL?) W/ Romeo and extended mag. 98% of my carry is a G30s or G43x in a Vedder IWB, so I “think” I should be GTG.

A LOT smaller than the safes in my Raptor or TRX, but it is what it is.....

Thank you......


.

 

[KenJ45]

Ever consider instead of having it inside of a holster inside the safe to have one of those strong magnets holding it to the side of the safe so once you open it you can pull the firearm one-handed and be ready to go? Or have anyone had experiences with those magnets not holding on to the firearm well? Maybe attach a "universal" holster to the side of the vault, one that's a little larger than the gun so it sits in there via gravity but when you need it you can just pull it out easily?

 

[Buster]

When Ford installed my console vault they told me it did not fasten to the console anywhere. There were 4 extra screws and when I told them that two were supposed to go 8nto the from and two at the back, I was told no. The insteucti9ns did not call for that. The safe will slide up and down inside of the console but. Does not come out. I also have to figure out how to set the combination.

 

[RicksMaverick]

To be fair as well, I am looking into modifying the under sear compartment to be able to lock it....

They make a vault for under rear seat driver side, that's what I installed. I have concealed carry but need someplace to lock it up when firearms not permitted, nice for other things too.

 

[RicksMaverick]

When Ford installed my console vault they told me it did not fasten to the console anywhere. There were 4 extra screws and when I told them that two were supposed to go 8nto the from and two at the back, I was told no. The insteucti9ns did not call for that. The safe will slide up and down inside of the console but. Does not come out. I also have to figure out how to set the combination.

Do you need setting instructions?

 

[RicksMaverick]

Are there any alternative part numbers from other ford models which will fit in the back of the truck?

Go direct to console vault, they have the under seat one for driver side rear seat.

 

[Sylvester]

Go direct to console vault, they have the under seat one for driver side rear seat.

Thanks, I already got one from one of the Ford Online dealerships for 360. I love it.

 

[Johnkn]

When Ford installed my console vault they told me it did not fasten to the console anywhere. There were 4 extra screws and when I told them that two were supposed to go 8nto the from and two at the back, I was told no. The insteucti9ns did not call for that. The safe will slide up and down inside of the console but. Does not come out. I also have to figure out how to set the combination.

Then the installer is a complete idiot. I just installed mine in 10 minutes and the instructions could not be more clear. You need to install the (4) front and rear self-taping screws.

consolevault.com/qrford.html

Directions set the combo are on the same link, it will probably take you all of 6 seconds...


.
.

 

[Johnkn]

Just installed my Console Vault. It is what it is. I ordered direct from CV and it was back ordered. After 5 weeks I canceled the order and purchased from a Ford dealer on Ebay and received it in 3 days for ~$8 less than direct from CV, and it has the little Ford logo LOL.

My G30S or G43X in Vedder IWB holsters will just fit flat on the floor left to right. I don't believe a G19 or larger would fit flat on the floor but would fit diagonally .

Good luck.,..

.

 

[tkammen270]

 

[Halo9x]

I’m glad I decided to get this. It’s very well built. The only potential drawback is the size of the opening. It’s just big enough to fit a P365XL. I’m not sure my full sized VP9 would fit.
Who else got one? What do you think?

I installed one in my Maverick today. I got a free vault from my dealer. Someone had ordered the vault a year ago but never picked it up. So, the sales manager asked my sales lady if she knew anyone who might want it. She asked me and I got it today. I installed it this afternoon. Not sure exactly what I’m going put in it but it getting it for free was hard to turn down. My dealership is a very good one.

Sponsored