13.2" screen SYNC 4 upgrade (so long, cubby!)

[SiGmA_X]

This thread seems to be misleading as it says it's for the sink for 13.2 in screen upgrade, whereas it's for the sink 12-in screen which looks odd to me in the Maverick.

I'd be super upset if they sent me either a 12" or 13.2" sink! What am I going to do with a sink in my Maverick!

Update:

This is how it is looking. I'm very happy with the final product, BUT right now, I don't recommend you buy the kit for several reasons. The plastic back plate does not have the holes to pass the screen cables, nor the 3 holes at the bottom that keep the screen fixed. The holes in the metal bracket do not align when you put the screen in place (They also do not provide the screws to attach the screen to the metal bracket). If you have tools to correct these problems you can buy it, if not, don't do it. I contacted them and they are going to correct those issues. As for programming, a lot of changes need to be made in FORscan as many things don't work well. Apparently, what they did was upload the Sync3 codes to the new APIM. I'm fixing that now. I'll keep you posted.

I appreciate you being a tester. If I were you, I'd be doing a charge back, they didn't deliver what they promised.

Sponsored

 

[ppagan2012]

 

[Billzilla15]

These bastards used my install picture for their cover photo. That is my install of the 13.2 escape screen not theirs

 

[dfitz]

Did you ever get everything working properly? I can't get the rear cam or my SiriusXM working.

 

[Toddman45]

You'd think they would give you a 13.2 screen from a Corsair or Escape. As the 13.2 is advertised correct?

Sponsored