DIY - build shield to cover underbody cavity behind left rear tire

[BOB225DUSTER]

Good question, I've been tinkering with this concept, looking to put something together that's closer to OP's solution, but with a printable template. I understand that several members want a kit they can buy, and those designing them have time invested. I'd like to just get a printable template posted for the rest of us. I'll check on this part from the other side today/tomorrow, see what I can come up with on mirroring it.

Let me know how you make out. Thanks

Sponsored

 

[MichaelHigh]

I’m going to start printing a few today. I’ll need a few people to test fitment.

I'm in Colorado, so this "uncovered" area is a concern. I'd be interested in one for sure.

Mike

 

[JDeckM]

Another update-
Shield is coming along well. We have a new design that simply clips in with no additional hardware needed. Testing has begun to determine whether it will be secure enough. I need 1-2 to test. Send me a DM if you might be interested.

 

[DryFlyGuy]

I have messaged you. Would be very willing to try your product.

 

[Deweyordeweynot]

Another update-
Shield is coming along well. We have a new design that simply clips in with no additional hardware needed. Testing has begun to determine whether it will be secure enough. I need 1-2 to test. Send me a DM if you might be interested.

I'm game if anyone else isn't...but I bet you'll have no trouble finding 'beta testers'.

 

[dlhort1955]

Another update-
Shield is coming along well. We have a new design that simply clips in with no additional hardware needed. Testing has begun to determine whether it will be secure enough. I need 1-2 to test. Send me a DM if you might be interested.

I have no clue how to send a DM on this site, but I will be interested after you are done with your beta testing. Thank you.

 

[Old_Norm]

I used an old floor mat and zip tied it using the existing holes.

 

[A.Bursell]

Has anyone seen any update on this? I last heard about the prototype being almost ready to test 2 months ago and nothing since..

 

[Old_Norm]

Has anyone seen any update on this? I last heard about the prototype being almost ready to test 2 months ago and nothing since..

I don't know. But I just checked and my old piece of floormat (post #128) is keeping mud and debris out of the cavity. Zero cost.

 

[nunucello]

Great work. I was just mocking up a model of your design and the measurements do not quite line up with your picture I assume you made a 1/1 cardboard model so I based this model on that 13-inch measurement on the bottom. Do you mind helping me clear that up? Anyway, I will be making some if anyone is interested.

I'm interested !

 

[DadsLariat]

To dlhort1955, to start a DM, at least this is how I do it....

1) click on the person / picture of the person you want to DM
2) a new screen will show
3) click on " Start Conversation "

 

[P99Guy]

I didn't read all 9 pages but I need to get my post count up so here goes.

Wait isn't that hole for Ventilation? The moisture won't be able to get out if....

 

[HSBII]

I would be interested in the revised drawing with measurements if it’s available…

 

[nunucello]

Has anyone been able to purchase this from JDeckM ? I tried reaching out but have not heard anything. Thank You.

Sponsored