are you looking for your original coding? also what are you trying to do? add Cruise control?
Let me look into this a bit my bad. I meant to earlier
So I can have you try my stock steering wheel coding for my 2024 XL with cruise control and see if that works for you! Also if you provide me with your vin in a direct message, I can get your factory codings to revert back to if that's what you're trying to do! Let me know how I can help!!
I have 1. off road screen listed already!. I will change 2. and 3. right now. I noted and moved 4.launch control. So right now I'll work on updating 2 and 3. THANK YOU!Dear EONR24, I have a few contributions to make:
1- Off-Road Display on a 6-inch Display:
This feature will also work on hybrids and non-FX trucks, both FWD and AWD.
In the IPC Module (In the as-built):
720-07-02 X7XX-XXXX (Change the 2nd digit to a 7). Please make a backup before writing.
This was also tested on a 4-inch display and it does not work at all.
I discovered this information on the Forscan Forums.
2- The option of TSR menu (enabled vs disabled) in some 6-inch and 4-inch displays is buggy. Sometimes you have to set it to Disabled, and other times to Enabled in order to get it to work. I think it's a bug in Forscan.
Be aware that TSR activated on a 4-inch cluster may knock down Pre-Collision Assist. I strongly recommend adding this comment to your masterlist to inform 4-inch cluster users. In Argentina, 2 XLT Mavericks have the exact same issue, trying a lot of methods to activate this function.
3- The Canadian mode for Daytime Running Lights works even better on XL and XLT models, but in your masterlist, you only mention the change on the IPC.
Go to IPC module.
Change the Daytime Running Lamps Menu (Additional changes required in BCM) from Disabled to ENABLED.
Then, go to the BdyCM Module Configuration:
Change DRL include park lamps from Disabled to Enabled.
So, you will protect your headlamps.
You will have plenty of control over your lights.
The auto function will work perfectly (they will turn on when it's dark).
If you are living in the middle of nowhere, there's no point in having lights on during the day.
4- Launch control option, works pretty well on XLT, but add an option in the menu to "check" but there is no way to check it, This options apeares in pure white, but is imposible to "check it".
But FordPerformance screen works well and "launch button" also works perfects.
Have a great day.
Best Regards.
Sweet--I'll give it a try this weekend!I found out where to make the change at after doing some research! Here is where the change needs to be made in the BCM. You have to use a HEX TO DEC Converter which I can do real quick and get you the correct coding for 26 PSI.
FIXED!. Except I did not add that TSR could interfere with pre collision assist. Is there any evidence of this? I have an XL with the 4 inch cluster and I have had my pre collision assist kick in after I had enabled TSR. The codings seem completely separate after looking. I can add to make sure pre collision assist is enabled afterwards !
Thanks for testing them out. I made some corrections and will remove the tailgate ajar warning. I have searched a lot in the coding and I do believe starting up in a desired mode other than normal is impossible using Forscan HOWEVER, Another Forum member here makes a device that is relatively easy to install and lets you start up in any mode you desire. The product is called MYMAVMODE. Here's the link below.
Good information! Thank You. I will add a disclaimer to the spreadsheet about pre collision !I can gather the evidence, but I should make a video, and it could be lengthy.
When my TSR is off, I receive Pre-Collision warnings when I accelerate behind a car. When my TSR is ON, there is no way to make it appear. I haven't tried to make the Auto-Braking function work, but I no longer receive the alert.
I am one of the individuals in this video, so believe me, I really know how to make the alert appear.
On the other hand, I would love to know what's happening in my truck and my friend's truck. One is a 2022 XLT (4" cluster), and mine is a 2023 XLT (4" cluster). In my other friends' trucks, three more Mavericks 2022 Lariat (6.5" cluster) and two more 2023 Lariat (6.5" cluster) worked perfectly. (We have a small club here in Argentina, so I have LOTS of friends with Mavericks. Also, last Sunday, I programmed the TSR on a Hybrid (6" Cluster).
I Would love to know wich firmware you have in your IPC and IPMA, and also specifically wich options are checked in your Mav, Because maybe... Square signals work different than rounded ones. (But once agian, in my friends 6" this works perfect, in my other friends with 4" pre-collision is alert is not working, no matter if you re-enable it, or if you change sensivity).
Comment, In argentina Overpass signs does not work, becuase in the streets we have a slightly different signs, We tested printing European signs and putting them on the streets, and then Overpass icon appears on IPC.
Have a great Day.
Im going to look into the coding more to see if this can be fixed and I can figure out what may be causing this..I can gather the evidence, but I should make a video, and it could be lengthy.
When my TSR is off, I receive Pre-Collision warnings when I accelerate behind a car. When my TSR is ON, there is no way to make it appear. I haven't tried to make the Auto-Braking function work, but I no longer receive the alert.
I am one of the individuals in this video, so believe me, I really know how to make the alert appear.
On the other hand, I would love to know what's happening in my truck and my friend's truck. One is a 2022 XLT (4" cluster), and mine is a 2023 XLT (4" cluster). In my other friends' trucks, three more Mavericks 2022 Lariat (6.5" cluster) and two more 2023 Lariat (6.5" cluster) worked perfectly. (We have a small club here in Argentina, so I have LOTS of friends with Mavericks. Also, last Sunday, I programmed the TSR on a Hybrid (6" Cluster).
I Would love to know wich firmware you have in your IPC and IPMA, and also specifically wich options are checked in your Mav, Because maybe... Square signals work different than rounded ones. (But once agian, in my friends 6" this works perfect, in my other friends with 4" pre-collision is alert is not working, no matter if you re-enable it, or if you change sensivity).
Comment, In argentina Overpass signs does not work, becuase in the streets we have a slightly different signs, We tested printing European signs and putting them on the streets, and then Overpass icon appears on IPC.
Have a great Day.
