Sold: Wisconsin Kia-Hyundai ADUP1 Mirror Wiring Harness

[Dean S]

This is a good deal at $30 and I'll buy one if I can, if not I'm capable but am having a hard time getting the part numbers for the connectors, specifically the connector that connects to the 5 pin plug off the mirror.

Sponsored

 

[Old Man]

I'm truly sorry everyone, I'm doing the best I can. If I had the $2k - $3k to afford the machine that would automate the stripping and crimping, I'd keep doing it indefinatley. Even the official Molex hand crimper for the pins is $1000.

We understand. Don't worry.

 

[mikeakasully]

This is a good deal at $30 and I'll buy one if I can, if not I'm capable but am having a hard time getting the part numbers for the connectors, specifically the connector that connects to the 5 pin plug off the mirror.

If you ordered the Adup1 mirror it should come with a wiring kit that should have a pigtail.
The part numbers needed to splice into the factory harness are:

(Mouser part numbers):
Pins (loose piece): 538-560023-0421-LP
Female Connector: 538-34791-0080
Male Connector: 538-34792-0080

 

[Dean S]

Perfect, thanks Mike. I was actually referring to the pigtail which somehow eluded me when I opened the box, after reading your comment I looked again and found it. The part numbers will be very helpful if I make my own. Thanks for doing all the legwork and sharing.

 

[mikeakasully]

Perfect, thanks Mike. I was actually referring to the pigtail which somehow eluded me when I opened the box, after reading your comment I looked again and found it. The part numbers will be very helpful if I make my own. Thanks for doing all the legwork and sharing.

On your included pigtail I splice the 2 positive wires, the one that has the white stripe, and the one next to it together, (always on, and ACC on). The Far wire is the negative.

 

[skadizzle]

Since it will be first come on Monday do we need to PM Monday then or will you have a link or something? Thanks

 

[elkyss81]

Will be watching Monday because I would like to buy one, if there's one left available. I was originally just going to use butt connectors and splice in but this is much cleaner and neater! Nice work!

 

[CC_Maverick]

Hi Mike any news about opening the orders up or did I miss the window.

 

[mikeakasully]

Sales now open.

 

[Skot5272]

Purchase completed. Thank you for your time to make these for us. Greatly appreciated.

Please reserve one for @Old Man He was one of the first requesting one.

 

[CC_Maverick]

I don't see a link to buy Mike and it says 0 available still

 

[Mosin]

I would like to buy a harness Please, and the $30.00 payment was sent to you a few minutes ago Mike. Thank You so much for taking the time out of your busy life to make these. Thanks Again Frederick V. Receipt number: 0E525106RE217552S

 

[CC_Maverick]

I don't see a link to buy Mike and it says 0 available still

Mike , I obviously want 1 as well.

 

[clay65]

I’ll take one!! Shipping to 17078.

I will take one

 

[A.Bursell]

Been PMing with you don't know if I need to message here too or not. So just in case, I'm in for one please.

Sponsored