Eibach lowering springs installed on my Maverick Hybrid!

[Burdy]

Sorry for delay. Had some family issues. Took this one real quick. Let me know if you need different Angle.

IMO that stance is perfect. Not too low and I like a front rake on a truck. I wish I could find a 20" wheel/tire combo that weighed less than the factory 17" steelies. Ill take an 18" combo thats the same or less as well.

Sponsored

 

[Phileaux]

Sorry for delay. Had some family issues. Took this one real quick. Let me know if you need different Angle.

Incredible shine!

 

[Jongmur]

IMO that stance is perfect. Not too low and I like a front rake on a truck. I wish I could find a 20" wheel/tire combo that weighed less than the factory 17" steelies. Ill take an 18" combo thats the same or less as well.

Thanks you ! I believe this combo is a bit lighter in weight.

 

[ShadowChas]

I seen a forum member building a faster maverick on here weighed his stock steel wheel/tire combo was 50.4 lbs. so there’s probably a few options for weight savings or at least comparable.

 

[Burdy]

I seen a forum member building a faster maverick on here weighed his stock steel wheel/tire combo was 50.4 lbs. so there’s probably a few options for weight savings or at least comparable.

I was getting 51.2lb from getting the specs on the internet, but yes, close enough. Preferably I would like to have an 18" combo that beats that, but if a 20" exists I would certainly take a look.

 

[Phileaux]

I was getting 51.2lb from getting the specs on the internet, but yes, close enough. Preferably I would like to have an 18" combo that beats that, but if a 20" exists I would certainly take a look.

Save the steelies for snow tires

 

[Dukewagon]

Looks great. Looking forward to the FWD springs. I have the Escape springs, but It rides rough.

 

[Jongmur]

2.5 drop front/ 3.5 drop rear
The truck rides great !

 

[Btoryo]

Better side pics?

Here's a better shot!

 

[Walter56]

Nice I’m hoping to have mine done within week or so. Just waiting for my buddy to have a spot open up where I have access to a lift. Don’t wanna mess with doing it in the drive ways and wife get mad cause I took up the whole area

Wives, right?

 

[Jongmur]

Here's a better shot!

You’re the man. Thanks

 

[Jongmur]

Here's a better shot!

Can you email me this ? Please
[email protected]

 

[Btoryo]

Can you email me this ? Please
[email protected]

It's the full size version, you should be able to save it.

 

[ShadowChas]

2.5 drop front/ 3.5 drop rear
The truck rides great !

So is that the actual Eibach spring height being released for the fwd/hybrid models? (Or the actual measurements before/after you worked on your truck) since I see the awd version is only 2.0 front/2.9 rear and your truck looks amazing

 

[Jongmur]

They mentioned due to the

So is that the actual Eibach spring height being released for the fwd/hybrid models? (Or the actual measurements before/after you worked on your truck) since I see the awd version is only 2.0 front/2.9 rear and your truck looks amazing

thanks. They mentioned due to the weight

So is that the actual Eibach spring height being released for the fwd/hybrid models? (Or the actual measurements before/after you worked on your truck) since I see the awd version is only 2.0 front/2.9 rear and your truck looks amazing
[/QUOT

Sponsored