WeatherTech hood deflector installed

[Clarkdonbran]

I ordered the Lund deflector from the accessories site back in March, but it got lost in transit. The WeatherTech deflector seemed like a decent replacement. I just finished installing it.

Sponsored

 

[FriscoTXJoe]

I'm kicking this idea around while waiting for the dealership to have my truck ready.

What are the main benefits? Prevent rock chipping on the hood?

Does it create hood shake at high speeds?

Is there an adhesive to mount this? Wondering if that would be a problem for car washes or when you remove it?

 

[Clarkdonbran]

I like the looks and I’ve had some rock issues lately. I think it mostly protects the leading edge of the hood. I haven’t driven with it installed yet. It adheres with 3m tape. Feels pretty sturdy.

 

[sn00pyguy]

I'm kicking this idea around while waiting for the dealership to have my truck ready.

What are the main benefits? Prevent rock chipping on the hood?

Does it create hood shake at high speeds?

Is there an adhesive to mount this? Wondering if that would be a problem for car washes or when you remove it?

I would get it to prevent the chipping. It will also prevent bug guts at least on the hood front. I order one from RealTruck.com. The install uses plugs that already exist that hold the foam insulator in place at the front under the hood. There are also some clear rubber feet to use so the wind doesn't bounce the shield off the hood. It does take extra time for the paint to totally cure. 60-90 days? And I am not sure if the chipping was from paved roads or Dirt road drivers. That would be good to know.

 

[FriscoTXJoe]

Looking at these 2 options. Do you think this first one extends too far on the sides of the hood? Or is that a benefit to protect the quarter panels? Or just the picture/rendition?

2022 Ford Maverick AVS Bugflector II Bug Shield | RealTruck

VS this one

2022 Ford Maverick AVS AeroSkin Bug Shield | RealTruck

 

[JONROD0220]

I just installed this also. Easy install , quality material , 3M adhesive. In my opinion, these black hood protectors look best on our white colored trucks.

 

[rclee]

@JONROD0220 Looks like you are a Ford Family

 

[Last Truck Ever]

Is no one concerned about the 3m tape directly on the paint? I've used the 3m tape in multiple applications, and over time it's just ungodly trying to remove it. Since you can count on these deflectors to wear out / need replacement after several years, I anticipate a helluva problem getting the old tape off, without damaging the paint. I'd rather have a bolt on option -- love Weathertech, but they don't seem to have one?

 

[athertonbt]

Is no one concerned about the 3m tape directly on the paint? I've used the 3m tape in multiple applications, and over time it's just ungodly trying to remove it. Since you can count on these deflectors to wear out / need replacement after several years, I anticipate a helluva problem getting the old tape off, without damaging the paint. I'd rather have a bolt on option -- love Weathertech, but they don't seem to have one?

There's a build out there somewhere with the bolt on option that uses existing holes under the hood...just have to comb through the posts...

 

[PDM33]

That one looks really good! Very low profile, I like it. Too bad I already did my Graphene coating and nothing will stick now. That bolt on one would be my only option at this point.

 

[Dad]

Is no one concerned about the 3m tape directly on the paint? I've used the 3m tape in multiple applications, and over time it's just ungodly trying to remove it. Since you can count on these deflectors to wear out / need replacement after several years, I anticipate a helluva problem getting the old tape off, without damaging the paint. I'd rather have a bolt on option -- love Weathertech, but they don't seem to have one?

Earlier on this thread someone mentioned a bolt on hood protector available from RealTruck.com. You might want to check that out.

 

[Jah.]

Avs bugflector 2 from realtruck . bolts on with plastic grommets in existing holes .also covers the front fenders edges . I had to extend the center two flanges to match up with the holes . others didn't have this problem . like the product but not avs customer service . I was missing two grommets and had to buy from Amazon because avs never did send them after two contacts . also like that I can lean forward and see top edge of bugflector to tell approximately location of front of truck is when parking .

 

[PriusHater]

Looks like an exact match to the Ford OEM hood deflector. No surprise there as it is produced by Lund too.

 

[Shakesbear]

Is no one concerned about the 3m tape directly on the paint? I've used the 3m tape in multiple applications, and over time it's just ungodly trying to remove it. Since you can count on these deflectors to wear out / need replacement after several years, I anticipate a helluva problem getting the old tape off, without damaging the paint. I'd rather have a bolt on option -- love Weathertech, but they don't seem to have one?

Other than a lot of elbow grease, goo be gone, and WD40 (best for removing 3M tape), I've never experienced a problem removing 3M tape. It is damn sticky stuff though Always treat the area with a little Mirror Shine afterwards.

 

[BradGroux]

Other than a lot of elbow grease, goo be gone, and WD40 (best for removing 3M tape), I've never experienced a problem removing 3M tape. It is damn sticky stuff though Always treat the area with a little Mirror Shine afterwards.

Orange Goo Gone works wonders for the 3M tape residue.

Sponsored