Tail light connectors for TOAD Maverick

[DiverUtah]

Just a little info on tail light connectors for TOAD Maverick. I wanted to install Tail Light Isolating Diodes https://a.co/d/a5TvzSn but did not want to cut into my factory wiring so I found some connector pairs on Amazon https://a.co/d/a5TvzSn that plugged in perfectly on my 2023 Maverick Lariat Hybrid (I don't know if this will fit other models)

Sponsored

 

[Cancunbadlands]

I got a pair in my glovebox from Ford

 

[BlueSpec1]

Just a little info on tail light connectors for TOAD Maverick. I wanted to install Tail Light Isolating Diodes https://a.co/d/a5TvzSn but did not want to cut into my factory wiring so I found some connector pairs on Amazon https://a.co/d/a5TvzSn that plugged in perfectly on my 2023 Maverick Lariat Hybrid (I don't know if this will fit other models)

What was the diode link?

 

[DiverUtah]

Diode link, sorry
https://a.co/d/3GHKzQZ

 

[Tony Pandy]

Just a little info on tail light connectors for TOAD Maverick. I wanted to install Tail Light Isolating Diodes https://a.co/d/a5TvzSn but did not want to cut into my factory wiring so I found some connector pairs on Amazon https://a.co/d/a5TvzSn that plugged in perfectly on my 2023 Maverick Lariat Hybrid (I don't know if this will fit other models)

Can anyone confirm this will work on the 2025 Lariat ? Seen others on various forums stating that the 2025 Lariat LED rear tail light assembly uses a different harness / connectors tham previous model years. I would prefer to use a plug like these vs cut & Splice or scotch locks etc.

 

[Tony Pandy]

Diode link, sorry
https://a.co/d/3GHKzQZ

I have the same set of diodes I bought a few months ago from same seller on amazon. They are good quality in build from visual inspection (Have not installed yet). They are a lot less expensive than the various Towing specialty sellers (e-Trailer, Hopkins etc.).

 

[DiverUtah]

Can anyone confirm this will work on the 2025 Lariat ? Seen others on various forums stating that the 2025 Lariat LED rear tail light assembly uses a different harness / connectors tham previous model years. I would prefer to use a plug like these vs cut & Splice or scotch locks etc.

Pop out your tail lights and compare the plugs to the picture. That is what I did.

 

[samhoustonkurt]

Has anyone confirmed these connectors work with the 2025? I don’t mind popping out the light and comparing to the picture, but I’d feel a lot better if someone has actually tested them out.
Thanks!

 

[Red Eyes - Wide Shut]

I got a pair in my glovebox from Ford

How much did you pay as compared to Amazon after market. I bet 2 and a half times more.

 

[Cancunbadlands]

How much did you pay as compared to Amazon after market. I bet 2 and a half times more.

IDK for sure, it came with the Tremor Package I guess, it was there

 

[samhoustonkurt]

Has anyone confirmed these connectors work with the 2025? I don’t mind popping out the light and comparing to the picture, but I’d feel a lot better if someone has actually tested them out.
Thanks!

I’ll answer my own question here. NO, THIS CONNECTOR WILL NOT WORK IN THE 2025 MAV. Looks just like it in the pictures, but slightly different shape and won’t plug in.

 

[BlueSpec1]

Wonder if connector is still Molex MX150 type, just different Key Option.

2023 was a Molex MX150 2x3

 

[EffNo50]

I got a pair in my glovebox from Ford

Are you sure those are for the tail light assemblies? The 2 connectors usually supplied with the trucks is for the 12v FlexBed connectors near the tail gate.

 

[Hot Runr Guy]

Wonder if connector is still Molex MX150 type, just different Key Option.

2023 was a Molex MX150 2x3

Look here: https://www.mavericktruckclub.com/f...mics-c1-hitch-light.69799/page-2#post-1157100

Looks like they switched from a "C" to a "B".

HRG

 

[Cancunbadlands]

Are you sure those are for the tail light assemblies? The 2 connectors usually supplied with the trucks is for the 12v FlexBed connectors near the tail gate.

You're right, my bad

Sponsored