Any one put a tri-fold hard cover on their 2024 bed?

[peag]

Any one put a tri-fold hard cover on their 2024 bed? what brand and length and width exact inches. I have tried 2 and they didn't fit. They were to narrow and to short.

Sponsored

 

[jb_cb900]

I put on the Ford tri-fold cover which looks very simular to a Backflip cover. Fits good. Not totally water tight but protects well from rain.

 

[peag]

I put on the Ford tri-fold cover which looks very simular to a Backflip cover. Fits good. Not totally water tight but protects well from rain.

 

[The Real Maverick]

Any one put a tri-fold hard cover on their 2024 bed? what brand and length and width exact inches. I have tried 2 and they didn't fit. They were to narrow and to short.

UnderCover Armor Flex.
Costs a bit.
But top of the line. You can sit on it. Put lumber on top of it (up to 350 lbs).
Mine is coated on all sides with bed liner type material. Flush fit.

You won't be disappointed.

Talk to the sales rep on this site to get a much lower price than MSRP.

 

[Blue_Max]

I had mine factory installed, so I don't know the dimensions, but it fits great and keeps essentially all water out. Also, all three folds fold up, but if you have them all folded up, it blocks the rear window.

 

[B. Adams]

I put a Diamondback on my Maverick. It fits perfectly, works great, and I'll never have to replace it.

Seems like no one but me wants to spend that much on a bed cover though.

 

[Dave O]

RTX-T-80337 - Retrax PRO XR Manual Retractable Tonneau Cover w/ T-Slot Rails $2,555.99 Delivered (I installed myself)

 

[Bigfoot7262]

I run a Tiptop TPX3 soft trifold (54.4"), perfect fit. $159 from Amazon. Very water tight. Hardware has not loosened with use.
Tiptop does also make a hard trifold but it's about $450, while there are other hard trifolds available for half that.

I went with a soft top thinking it'd be lighter and easier to remove but so far after a year I've only removed it once.

 

[MakinDoForNow]

Any one put a tri-fold hard cover on their 2024 bed? what brand and length and width exact inches. I have tried 2 and they didn't fit. They were to narrow and to short.

I have not ordered yet but may choose the cheapest one of these!
https://truck2go.co/collections/2022-2025-ford-maverick-45-tonneau-cover

 

[Ravinus]

Any one put a tri-fold hard cover on their 2024 bed? what brand and length and width exact inches. I have tried 2 and they didn't fit. They were to narrow and to short.

I installed a BAKFlip MX4 and it fits perfectly on my 25 XLT.

 

[riparian]

Installed the Rough Country Hard Trifold three months ago, pretty happy with it. Could be an inch longer but the fit is ok IMO. A little water intrusion from rain or snow melt, but acceptable to me. I only hand wash, so I can't comment on performance in an automatic car wash.

 

[MO HORSE]

This worked for well for me so far. Amazon

 

[PhillyGuy]

Any one put a tri-fold hard cover on their 2024 bed? what brand and length and width exact inches. I have tried 2 and they didn't fit. They were to narrow and to short.

Truxedo Pro X15 soft roll up cover. Looks great in black canvas and stretches tight. Just put it on - so far, so good. Decided to go with this instead of Bakflip since I was really looking for weather protection and to hide contents. It’s about half the price (give or take) of the Bakflip and is very sturdy. I had the Bakflip on my F350 and it was excellent, but didn’t think it was necessary for such a small bed.

 

[Brserv]

I put on the Ford tri-fold cover which looks very simular to a Backflip cover. Fits good. Not totally water tight but protects well from rain.

I have 2023 XLT and I have the Rough Country tri fold. Half the price and great cover.

 

[Brserv]

Any one put a tri-fold hard cover on their 2024 bed? what brand and length and width exact inches. I have tried 2 and they didn't fit. They were to narrow and to short.

Check out Rough Country covers.

Sponsored