H&R Super Sport Lowering Springs installed on Maverick XL Ecoboost AWD -- photos

Allen King Jr said:

Now a cold-air, exhaust, drag slicks, and remove badging and add the hybrid badge.... = "Sleeper" mode

Click to expand...

Dodeboost said:

Just installed H&R super sport lowering springs on my Maverick XL Ecoboost AWD.

Install was fairly simple. As of this post I’ve only driven about 10 miles with the springs so they may settle a bit more. The ride is noticeably stiffer, but it’s not uncomfortable.

There is visible camber on front and rear, so an alignment is definitely needed. Wheels are stock steelies painted gloss black.

Click to expand...

LM42 said:

Drag slicks? What for? This truck would need 200 more hp before traction is going to be a problem

Click to expand...

Allen King Jr said:

Now a cold-air, exhaust, drag slicks, and remove badging and add the hybrid badge.... = "Sleeper" mode

Click to expand...

mav_kev said:

#copspec killer look man!

Click to expand...

LM42 said:

I REALLY like this look. So clean and fun lowered with the steelies.

Click to expand...

AMCfoxbody said:

Anything unusual on the install? Tips, tricks, etc.? On your wheels...do you have the Crown Vic Police Interceptor center caps?

Click to expand...

Dodeboost said:

the center caps are the stock ones that come on the steel wheels. I just left them silver. Front is just your basic strut, used spring compressors to get the stock springs off, don’t need them when installing the H&r springs. H&r tells you to cut 20mm off the top of the bump stop, but the top of the bump stop is larger diameter and it snaps into the dust boot. So I cut about 15mm out of the center of the bump stop and glued the 2 ends together.
The rear was more of a challenge, ended up removing the outer bolt on the rear lower control arm, the sway bar link, and lower shock bolt. This allowed the lower control arm to drop and I was able to remove the stock spring without spring compressors. Just make sure you have a floor jack under the rear arm when doing this so you can control the downward movement of the arm, as it will still be under spring tension.

Click to expand...

22MavXLT said:

Man, these trucks so look SO MUCH better once they are lowered! I am glad I went ahead and bought the AWD eibach kit when it was on sale. Now, just need my ordered truck to get built and show up before I get antsy and go ahead and lower the one I have now.

Click to expand...

AMCfoxbody said:

Excellent, appreciate the detailed review. My build will look VERY similar to yours except I'm in Shadow Black. Have the H&R Super Sports in the shed along with the Crown Vic center caps...planning to get the springs on, the wheels painted gloss black, and the new center caps on soon...ya know once the truck shows up and I buy it!

Click to expand...