- Thread starter
- #1
I'm reading different results on these springs so I wanted to start a simple thread to document the results of those who have installed H&R Escape Springs on their Mavericks. Specifically AWD - H&R 28633-1
@Canyon Racer - 2" front drop, 3" rear drop, modified rear insulator
@JJC - 2" front drop, but rear drop was uneven @ 3.5" driver and 3" passenger, used Escape lower insulators BOTH sides and 1/2" shim on driver side only
@HPR - FD 1 3/4", FP 1 7/8", RD 3", RP 3" Escape insulator on passenger only
@Asaleigh - no measurements, can barely tell it lowered any at all, used Escape insulator
@Mrboom_5.0 - TBD pending installation
If you have no experience with these, please do not post in this thread. I'm simply looking for verified installations, the resulting specs and any additional info. that seems pertinent. I will update this post as more information is presented, I've tagged those who I know have or will be installing these springs. I understand some of you may have concerns such as payload of Escape vs. Maverick, I'm not looking for those kind of debates here; just measurements and install notes from actual installations.
I presume the best course of action for a simple installation would be for folks to just wait for Maverick specific springs. However, in looking at H&R's other drop springs, the drops are pretty mild. If we know the Escape springs drop 2"/3", that may be a preferred option over Maverick specific springs that only drop 1.4" all around (just an example as I have no idea what they're aiming for with the actual Maverick kit). Thanks, Dave
@Canyon Racer - 2" front drop, 3" rear drop, modified rear insulator
@JJC - 2" front drop, but rear drop was uneven @ 3.5" driver and 3" passenger, used Escape lower insulators BOTH sides and 1/2" shim on driver side only
@HPR - FD 1 3/4", FP 1 7/8", RD 3", RP 3" Escape insulator on passenger only
@Asaleigh - no measurements, can barely tell it lowered any at all, used Escape insulator
@Mrboom_5.0 - TBD pending installation
If you have no experience with these, please do not post in this thread. I'm simply looking for verified installations, the resulting specs and any additional info. that seems pertinent. I will update this post as more information is presented, I've tagged those who I know have or will be installing these springs. I understand some of you may have concerns such as payload of Escape vs. Maverick, I'm not looking for those kind of debates here; just measurements and install notes from actual installations.
I presume the best course of action for a simple installation would be for folks to just wait for Maverick specific springs. However, in looking at H&R's other drop springs, the drops are pretty mild. If we know the Escape springs drop 2"/3", that may be a preferred option over Maverick specific springs that only drop 1.4" all around (just an example as I have no idea what they're aiming for with the actual Maverick kit). Thanks, Dave
Sponsored
Last edited: