Turn off startup seatbelt status screen?

[Glen Baker LLC]

Oh, ok. I was hoping to eliminate having to push "OK" even after my seatbelt is fastened. That answers my question.

It takes FORScan to do that.

Sponsored

 

[MavStangVa]

Oh, ok. I was hoping to eliminate having to push "OK" even after my seatbelt is fastened. That answers my question.

You don't have to push OK. It will clear on it's own. Irritating? yes. Also if you buckle the rear belts and keep them buckled and buckle up the front occupied seats before starting the truck "NO POP UP."

 

[SLingbarT]

I bought 5 belt extenders for my 2024 XLT Hybrid from the Ford parts site for 2 cents each 2 years ago. They work like a charm...you'll never have to hit OK again for a seatbelt advisory. I checked and there are only 2 in stock.

https://ford.oempartsonline.com/oem-parts/ford-extension-lj6z78611c22aa

I got 4 of these and they did not work one bit, and they are uncomfortable to use unless your 100 lbs overweight.

 

[MavStangVa]

I got 4 of these and they did not work one bit, and they are uncomfortable to use unless your 100 lbs overweight.

I think @BomberBuck bought them to defeat the pop up not to USE on the drivers seat. If the rear seat belts are buckled or a device like the extender is inserted and any front occupied seat is buckled then the pop up disappears or if buckled before starting the truck it never pops up.

 

[DaddyDan]

This is reminding me of my wife's Yukon having a warning that said "fasten seatbelt before placing vehicle in gear" (or something similar) - to disable the warning and be allowed to place the vehicle in gear without the seatbelt fastened you just needed to change the settings using the infotainment screen.

(which I did because what about those times you need to back a vehicle out of a garage and park it in your own driveway. I'm not fastening my seatbelt for that shi*)

Sponsored