OBDII data available?

[Geep]

I am wondering what kind of data the hybrid will display when connected to a OBD2 Bluetooth and an appropriate app? Curious to see if battery voltage/capacity, electric motor/regen in operation, RPM of ICE and electric motor…..not so much as a diagnostic tool but more as a nerd

Sponsored

 

[clavicus]

Calling @fbov he may have experience with his Escape Hybrid.

 

[icegradner]

I am wondering what kind of data the hybrid will display when connected to a OBD2 Bluetooth and an appropriate app? Curious to see if battery voltage/capacity, electric motor/regen in operation, RPM of ICE and electric motor…..not so much as a diagnostic tool but more as a nerd

If it is like Toyota Hybrids a cheap OBD2 scanner or free/cheap app likely won't cut it. Would be nice to have acess to that data, but I never bothered with my Toyota Hybrid. At first I was really into the tech part, but after driving it for a while, 5-6 months, I moved on and just drove it.

 

[oilman300]

I owned a 2013 Prius and had Torque Pro. It showed the voltages of the cells in the battery pack as well as the ICE RPM. It didn't have any regen or electric motor stats that I can remember. It will be a while before Maverick Hybrid PID's are developed by the OBD software folks.

 

[Stock411]

I owned a 2013 Prius and had Torque Pro. It showed the voltages of the cells in the battery pack as well as the ICE RPM. It didn't have any regen or electric motor stats that I can remember. It will be a while before Maverick Hybrid PID's are developed by the OBD software folks.

For Prius's there was a special software called "Techstream" with a USB to ODB2 Interface. Since normal OBD2 readers couldn't fully read dealer only codes/hybrid system codes. I wouldn't be surprised if the Ford counterpart software gets released or leaked.

 

[GPSMan]

Any updates?

 

[Cryozebra]

Any updates on this? I've started toying around with my Panlong Bluetooth OBD2 scanner in my Maverick but noticed there's no specific profile for the Ford Maverick in the recommended Car Scanner app (which I used for a previous vehicle and worked great). Wondering if anyone's cracked the codes, am also a nerd interested in monitoring the hybrid data

 

[GPSMan]

ScanGaugeIII can view over 75 PIDs.

Many specific to the Hybrid Maverick.

When you order, tell them what you have and maybe they will pre-load the Maverick codes. I did it over WiFi once I had the unit. Not hard to do, just extra steps.

Sponsored