Lasfit Fog lights installed

[ToothGrinder]

Over the weekend I had my brother install some Lasfit 18W Fog lights. We also installed a nilight switch which allows for 6 accessories in total. The lights are mounted on the jjcLLC ditch light brackets.
In the future I do want to add a light bar, maybe cargo lights, and an air compressor. This switch will come in handy when adding more accessories.
We are also going to 3D print a removable plate/insert for the cubby so that I can mount the switch there. For now it’s just mounted with some 3M tape.
Links to products used:
Switch, Lights, Brackets

Sponsored

 

[KSC Grey Ghost]

I like your controller is it from Lasfit?

 

[ToothGrinder]

I like your controller is it from Lasfit?

I used a Nilight 6 Gang Switch.

 

[KSC Grey Ghost]

Thank you so much looks Sharp I like it

 

[ToothGrinder]

Thank you so much looks Sharp I like it

Thank you. Soon enough I'll have the switch mounted in the cubby hole so the wire will be hidden and it will look a lot cleaner. Just waiting for my brother to finish 3D printing some prototype cubby mounts.

 

[KSC Grey Ghost]

Love velocity blue

 

[Ford Motor Company]

Love velocity blue

That's a beautiful Maverick, Craig!

 

[wax87]

did it effect your gas mileage?

Just a joke people..

 

[Bry@n]

Thats what I planned. I'm using a Auxbeam controller that is 8 circuits though. Planned on doing bed lights, fog lights, add a light for the rear when hooking a trailer etc and maybe an air horm.

 

[Raymundo76]

did it effect your gas mileage?

Just a joke people..

Actually at 75 mph it will have a small impact, around town at 45 mph not a problem.

 

[ToothGrinder]

Thats what I planned. I'm using a Auxbeam controller that is 8 circuits though. Planned on doing bed lights, fog lights, add a light for the rear when hooking a trailer etc and maybe an air horm.

I thought about going for the 8 but I can’t think of that many accessories to add. For sure a light bar and some cargo lights after I get a rack installed.
My bed lights are hooked up to the power in the bed. Not sure if I’d want to run those wires all the way to the front and have to use my switch inside the cabin to turn them on.

 

[Bry@n]

I thought about going for the 8 but I can’t think of that many accessories to add. For sure a light bar and some cargo lights after I get a rack installed.
My bed lights are hooked up to the power in the bed. Not sure if I’d want to run those wires all the way to the front and have to use my switch inside the cabin to turn them on.

Aux beam has an app for phone. No need to use switch when outside vehicle.

 

[Deleted member 9167]

I used a Nilight 6 Gang Switch.

Where/how did you mount the relay box?

 

[ToothGrinder]

Where/how did you mount the relay box?

The relay box is mounted above the driver strut. It’s mounted to the plastic, there was space inside so it doesn’t touch the frame at all. There are a few places to mount it but this one felt good. Easy to remove if needed and the cap on top is still accessible.

To run the wire inside there is a grommet behind the battery. We just poked through those to get everything inside.

 

[ToothGrinder]

Update: 3D printed cubby plate to mount the switch. Gives it a much cleaner appearance.

Sponsored