I made a mistake.

[Shesmin]

I have a 2023 Hybrid Lux with 360
I had all recalls done. I was trying to enable TSR again. I saved my profile before making changes.
After making changes following instructions on another thread, I received a host of errors.

I didn't know that the profile didn't do a progressive name change using date and time . I saved my profile on exit and overwrote my good profile.

I ended up restoring as-builts line by line.

Now I am getting DTCs in a few places concerning light failure detection are not turned on.
Where are light failure detections stored and what are the correct values?

PS Now I name profiles by date and time!

Sponsored

 

[EONR24]

TRY THIS LINK!
Put in your country and VIN NUMBER and you'll be able to see all of the coding your truck SHOULD have!

 

[fauxhican]

The brake light recall did flash the modules where those hex codes are stored. I hadn't considered this, but the as-built data on the motorcraft site might not be updated to match. Has anyone confirmed that the website does update to match after a recall, or would it just remain there as it was when it left the factory?

 

[Shesmin]

From what I read the as built do not reflect any updates.

EQNOR24 that site is where I retrieved my as built. Thank you for the information. I think there is service notes attached to VIN, but I can't find them.

 

[fauxhican]

There's a service history page on the ford website, if you login, then look in the vehicle dashboard. Just checked mine, it has the date for my recall service, but nothing related to the new hex codes.

 

[fauxhican]

I contacted a friend that has been performing some of those brake light recall updates to ask about this. Sounds like the after recall values might only really show up on the devices they used for the updates, if the session was saved on that device, which may not have occurred. I'll report back if I hear anything useful beyond that.

 

[Shesmin]

Thank you for that information.

 

[Shesmin]

A big ask. Can someone who has a 2023 xlt hybrid lux with 360 that has done all recall updates post a picture of thier easy modes. for modules IPC and IPMA, as well as pictures of their ASBuilts for the same modules? It would be a big help! If you don't want to post it publicly then Direct Message (DM)me.

 

[EONR24]

A big ask. Can someone who has a 2023 xlt hybrid lux with 360 that has done all recall updates post a picture of thier easy modes. for modules IPC and IPMA, as well as pictures of their ASBuilts for the same modules? It would be a big help! If you don't want to post it publicly then Direct Message (DM)me.

Hey I could find a 2024 that matches your trims and get the as built for you! IDK if the 2024s have this update Im guessing Yes

 

[Shesmin]

Thank you.! That would be very helpful as long as it is a hybrid xlt lux with 360.

 

[EONR24]

I got these codings based off of this 2024 HYBRID XLT LUX with copilot 360 for sale from this link! https://www.kingsfordinc.com/invent...lUht6Sa_AwyNLTTOeetrRDhy3m7FTiShoCC-QQAvD_BwE

 

[EONR24]

IPMA below

 

[EONR24]

IPC below (2 pictures)

 

[EONR24]

Thank you.! That would be very helpful as long as it is a hybrid xlt lux with 360.

Let me know how that works for you. You only need the as built because the easy mode changes just change as built coding to achieve them. Im thinking it should work perfectly.

 

[Shesmin]

You are awesome thanks.

Sponsored