Front factory mats

[Hot Runr Guy]

Maybe something changed on 23xl and someone forgot to tell the Matt manufacturer or I got 22 Matt's after they changed 23.

Bobby, can we get a picture of the front end of your passenger-side mat? With mine all the way back, here is where the front is, in relationship to the fuse panel plate.

HRG

Sponsored

 

[Truck Guy]

Glad I didn't pay for the Ford ones. Very happy with the Tuxmat I bought for the hybrid.

 

[Carlitos_92]

Bobby, can we get a picture of the front end of your passenger-side mat? With mine all the way back, here is where the front is, in relationship to the fuse panel plate.

HRG

I was about to say the same thing but couldn't find a pic until today... This one also shows the front and back ends covering just fine from what I can tell.

 

[RJC]

Matt's are different in the Ecoboost.

 

[Bobby Chapman]

Here are photos, I think same as yours

 

[Bobby Chapman]

I was about to say the same thing but couldn't find a pic until today... This one also shows the front and back ends covering just fine from what I can tell.

I was about to say the same thing but couldn't find a pic until today... This one also shows the front and back ends covering just fine from what I can tell.

Does your Matt have the hole in it to put the pin into, mine does not. Mine is 23xl,2.0

 

[HeyBales]

My factory Ford mats both fit perfectly.
The passenger side never moves, don’t notice a hump over the unused button.

I should probably get into it and drill me a hole in the mat for the button. Just for chits and giggles.

Won't work as the whole area is raised to account for the pin.

 

[Cherokee]

Won't work as the whole area is raised to account for the pin.

Yep, that’s a Fup up, not a defect :’P

 

[Hot Runr Guy]

Here are photos, I think same as yours

So what was your 1st posting trying to show, that you didn't have the mat in the correct position, like you do now?

HRG

 

[Bobby Chapman]

So what was your 1st posting trying to show, that you didn't have the mat in the correct position, like you do now?

HRG

It shows the pin on the floor, and no pin hole on the Matt for it to snap into, so there is a hump on the Matt when it is in the correct placement, just a pet peeve

 

[Carlitos_92]

Does your Matt have the hole in it to put the pin into, mine does not. Mine is 23xl,2.0

I only use the carpet mats up front, but my recollection is that they are meant to stay in place whether the rubber liners are there or not. So my passenger carpet mat has the hole for the pin - but when in place, the carpet mat provides a flush surface for the liner to sit on.

 

[Bobby Chapman]

I only use the carpet mats up front, but my recollection is that they are meant to stay in place whether the rubber liners are there or not. So my passenger carpet mat has the hole for the pin - but when in place, the carpet mat provides a flush surface for the liner to sit on.

My factory carpets have the pin holes on them . 2 on drivers side and 1 on pass side.

 

[Bobby Chapman]

I only use the carpet mats up front, but my recollection is that they are meant to stay in place whether the rubber liners are there or not. So my passenger carpet mat has the hole for the pin - but when in place, the carpet mat provides a flush surface for the liner to sit on.

I put my Matt's in frist and carpeted ones on top of matts.

 

[Carlitos_92]

I put my Matt's in frist and carpeted ones on top of matts.

Ok, not saying the OEM mats are perfect, but that order is backwards and not as intended. Carpet under, rubber above.

Sponsored