Dash cubby rubber liner?? Who sells them?

[Uglyoffroad]

I’m looking for a rubber liner that fits in the dash cubby circled in the picture. I’ve seen Liner kits, but none of them seem to have a liner for that spot. Ideally I would like to find one that has a slight lip on the outside of it to keep things from sliding out.
Has anyone found a kit that includes that liner or someone that sells that liner separately?

Sponsored

 

[Llamaryudo]

I use wool instead,

 

[Uglyoffroad]

I use wool instead,

I like it!! I really want to put the garage door opener in there but it slides around and rattles without a liner.

 

[Carlitos_92]

Yeah, I was going to say "you've already got a lip" but apparently OP does not!

That's too bad. If the lip that is supposed to be there was there, it'd be way simpler because you could buy all kinds of stuff at the hardware store and just cut it to fit. Toolbox liner, cushioned shelf paper, one of those jar-opener grippy things. No shortage of thin rubbery material out there.

Edit: Do XLs not have that piece? It looks like there is a place for it to snap in... I'd start with ordering that from Ford; can't be that expensive.

Edit Edit: Found it. Not affiliated with this dealer, but they had a picture:
https://parts.lakelandford.com/p/Fo...LY---STOWAGE-Mat/105735616/NZ6Z6006202AA.html

 

[Uglyoffroad]

Yeah, I was going to say "you've already got a lip" but apparently OP does not!

That's too bad. If the lip that is supposed to be there was there, it'd be way simpler because you could buy all kinds of stuff at the hardware store and just cut it to fit. Toolbox liner, cushioned shelf paper, one of those jar-opener grippy things. No shortage of thin rubbery material out there.

Edit: Do XLs not have that piece? It looks like there is a place for it to snap in... I'd start with ordering that from Ford; can't be that expensive.

Edit Edit: Found it. Not affiliated with this dealer, but they had a picture:
https://parts.lakelandford.com/p/Fo...LY---STOWAGE-Mat/105735616/NZ6Z6006202AA.html

Definitely appreciate the link. It didn’t make sense to me that there was obviously a hole to lock in something there but nothing there.
It appears of this as if that piece was available on 2022 and 2023 models. Mine is a 2024. I bet it would snap right in though. Ford was looking to save $2 on the 2024 models due to inflation.

I’ll be ordering it and then cut a piece of rubber out to go in there.

 

[EONR24]

 

[k2rizzle]

I’m looking for a rubber liner that fits in the dash cubby circled in the picture. I’ve seen Liner kits, but none of them seem to have a liner for that spot. Ideally I would like to find one that has a slight lip on the outside of it to keep things from sliding out.
Has anyone found a kit that includes that liner or someone that sells that liner separately?

Sent you a PM

 

[SLH13]

I’m looking for a rubber liner that fits in the dash cubby circled in the picture. I’ve seen Liner kits, but none of them seem to have a liner for that spot. Ideally I would like to find one that has a slight lip on the outside of it to keep things from sliding out.
Has anyone found a kit that includes that liner or someone that sells that liner separately?

I have seen other posts where people put velcro on the side or top of the cubby and on the back of the garage door opener. No more sliding around and leaves the bottom of the cubby for ??
Of course you would still need the rubber for what ever else you wanted in there.

 

[Jamsandolina]

I’m looking for a rubber liner that fits in the dash cubby circled in the picture. I’ve seen Liner kits, but none of them seem to have a liner for that spot. Ideally I would like to find one that has a slight lip on the outside of it to keep things from sliding out.
Has anyone found a kit that includes that liner or someone that sells that liner separately?

I bought a complete set from Amazon that had the cubby insert.

 

[IHateSpeedbumps]

Definitely appreciate the link. It didn’t make sense to me that there was obviously a hole to lock in something there but nothing there.
It appears of this as if that piece was available on 2022 and 2023 models. Mine is a 2024. I bet it would snap right in though. Ford was looking to save $2 on the 2024 models due to inflation.

I’ll be ordering it and then cut a piece of rubber out to go in there.

I have a 24 and it came with the insert

 

[TheShark]

I have a 24 and it came with the insert

Lariats do, XL's don't. We got something for all that extra money.

 

[Uglyoffroad]

I bought a complete set from Amazon that had the cubby insert.

Ordered. Thanks for the link!!

 

[Uglyoffroad]

Lariats do, XL's don't. We got something for all that extra money.

I ordered the part, and it only shows that it fits 22, and 23 models. That’s why I was thinking they removed it in 24.

At least it’s a cheap enough those of us who got XLs can add it if we want it. Nothing will stay in that cubby the way it is in our truck. It’s pretty much useless without the trim piece.

 

[Jamsandolina]

HHere

Ordered. Thanks for the link!!
[/QUOTE
Here is what it looks like installed. I hope it will work for you.

Sponsored