Bed rack that works with hard folding tonneau?

[PRW]

I have the Elevate Rack/Rails with the Ford hard folding cover and can confirm the setup works

I have the Ford hard cover and am considering that rack. Can you easily/quickly remove the rack from the rails? Or is it easier to take the uprights out of the sliding mounts? I only plan to have the rack on the truck when I want to go kayaking, so I’m looking for something I can put on and off in a reasonable amount of time.

Sponsored

 

[Hammer]

I have the Ford hard cover and am considering that rack. Can you easily/quickly remove the rack from the rails? Or is it easier to take the uprights out of the sliding mounts? I only plan to have the rack on the truck when I want to go kayaking, so I’m looking for something I can put on and off in a reasonable amount of time.

I just lift off both sections of upright with crossbar attached. First the rear section and then the front section. I also bought a set of threaded star knobs on Amazon which thread onto the t-bolts for the uprights and that way I can just leave them in the rails. Pic attached.

 

[PRW]

I just lift off both sections of upright with crossbar attached. First the rear section and then the front section. I also bought a set of threaded star knobs on Amazon which thread onto the t-bolts for the uprights and that way I can just leave them in the rails. Pic attached.

Oh, that’s great. That was one of my worries – what to do with the loose t-bolts. I’ll look for those knobs on Amazon. Thanks.

 

[Solodriver]

The best set up that works together that I have seen so far is from SynthicUSA. Hard roll up tonneau and bed racks with different heights. Not an Amazon special either, looks well built.

Sponsored