'26 Maverick Hybrid build - Obsession Project

MDmaverick · May 21, 2026

Looks incredible

BRAT · May 23, 2026

Please let us know ASAP i want fog on my mav

Nootch · May 28, 2026

chilicharger said:
I am most impressed with the Lobo lower bumper parts. Everything is plug and play? Do you plan on swapping to the Lobo grille, as well?

~ Not at the moment, but it is definetly on the "would be nice" list. ~

26 Ford Mav XL said:
Definitely interested in the lobo valance and fog light kit. Send the info on where we can purchase when you get dialed in, appreciate any help!

~ I reached out the parts manager at the dealer for a breakdown of the parts that were ordered. When I get a list I will post in this thread. ~

So the last few days have been learning about Epoxy Resin sub boxes and wiring my amps up. I am admittingly trying to go for the Factory Stock look with a lot of this, and I just got the basics done tonight and fine tuning and massaging start tomorrow. I need to pull the door cards off again and sound deaden the plastics on the backside of the cards as running my Solo Baric L7 from my previous vehicle on the back seat highlighted some plastics squeaking. I do admit, that the plastics on the 2026 are a bit 'light' and if you look at them wrong they will mar and leave marks.

At the time of posting this, I forget the forum member who posted his sub box install video. Thank you though, it was a great help in setting up this and making it work as well as it did. The bracing was done about 30 minutes before I remembered I had 6 carbon fiber arrows that could have been used for bracing to reduce the weight and make it look cleaner on the inside. However the 1/2x1" with a 1/2 round over MDF strips made for super sturdy box. the 1/2 top has epoxy resin soaked in it plus 3/16" woxen/CFM on the large panel flat area.

Also yes, that is a H6 battery mounted sideways in the battery tray. fits pretty good with very little mods. When I get the mounting hardware for the speaker grill, I will put the rear seat back in and maybe start on the lighting. In trying to configure the Key200.4 I did a dumb-dumb and didn't get the woofer/tweeter on the right amps, which lead me down a bit of a rabbit hole in trying to get the auto-tuning set up. That lead me to discover with the mods that the Flat EQ is still not solved in the 2026. did the hex code edit from another thread and it doesn't send flat signal to all speakers. However the B&O stage presence isn't really all that bad, and the speakers with amp will make up for a lot what is missing.