I would, was thinking about using Deutsch or WeatherPack since can get them though work if I decide to add something.Can't you just cut the dang thing off and put your own type connector on there?
Just asking for a friend...
Sponsored
I would, was thinking about using Deutsch or WeatherPack since can get them though work if I decide to add something.Can't you just cut the dang thing off and put your own type connector on there?
Just asking for a friend...
You can buy them on eBay…Anyone have a guess as to what type connector is used on the 12V power supply wires in the bed? Deutsch connector?
Glen to the rescue!
I will use the one that came in the glove box with my hybrid maverick. Stop by Ford parts if you need one. Sorry I do not have part number with me.Anyone have a guess as to what type connector is used on the 12V power supply wires in the bed? Deutsch connector?
These say they are not compatible.These worked well for me
https://www.amazon.com/gp/aw/d/B001OAB6BW?psc=1&ref=ppx_pop_mob_b_asin_title
It’s what I used for my bed lights, can’t say if it will plug into the 12v power supplies in the bed, but plugged into the oem light plug that’s in the bed. I’ll try the other one in the bed power outlet todayThese say they are not compatible.
That's what we were told. However, in opening up the fuse box AND looking at the electrical diagram, it appears that both sides are on the same circuit connected to a 20A fuse. On the plus side, the 20A fuse seems to be a newer style that's a fast-blow so there's little damage to the system in a short (I've done it accidentally and verified that's true). Unfortunately, the wires Ford used is smaller than the usual automotive standard for 20A. So try not to go beyond 10A on each side for extended periods.From another forum
- The two 12V pre-wire leads have their own circuitry & their own fuses (max 15 Amp combined) to protect the function of the vehicle electrical system.
- Access is through a small rectangular trim covered port on the left & right sides of the pick-up bed, near the tailgate.
- The vehicle comes with one 12V connector in its own packaging. (Add’l connectors are available thru dealer channel).
- The one 12V connector attaches to either of the 12V pre-wire leads.
- What is the max wattage of an inverter that can be attached to a 12 V pre-wire lead? 180 W