S-Cargo Truck Cap (Matte Black Jason Trek Bed Cap) installed on Maverick

[caa60126]

From S-Cargo in Loveland CO

I am very happy with it.

I ordered the XLT August ‘23, received the ‘24 model December ‘23.

The cap took 8 wks.

Sponsored

 

[Maverickman74]

Looks great almost went with one of em but could only find a ARE MX where I was picking up my Tremor.

 

[Michael42]

looks great.

 

[caa60126]

Looks great almost went with one of em but could only find a ARE MX where I was picking up my Tremor.

ARE is a great cap too. I had one for many years.

 

[Maverickman74]

ARE is a great cap too. I had one for many years.

I have been happy with it. I noticed you have cargo rails. Where the bolts go through the top to the interior I added a flat piece of aluminum from Lowe's and took a little angled piece and made tie points. It's pretty handy for tying up light things, or hanging a net to keep clutter out of the bed floor. It wasn't a hard mod to do but my wife did have to help since I could not be on the inside and outside at the same time.

Here is my write up on it. If nothing else hanging a net back there make the perfect place to secure pizza for transport to a tailgate party.
https://www.mavericktruckclub.com/forum/threads/are-mx-topper-cargo-mods.37285/

 

[25Fmaverick]

From S-Cargo in Loveland CO

I am very happy with it.

I ordered the XLT August ‘23, received the ‘24 model December ‘23.

The cap took 8 wks.

How much does that cap run ?

 

[caa60126]

I have been happy with it. I noticed you have cargo rails. Where the bolts go through the top to the interior I added a flat piece of aluminum from Lowe's and took a little angled piece and made tie points. It's pretty handy for tying up light things, or hanging a net to keep clutter out of the bed floor. It wasn't a hard mod to do but my wife did have to help since I could not be on the inside and outside at the same time.

Here is my write up on it. If nothing else hanging a net back there make the perfect place to secure pizza for transport to a tailgate party.
https://www.mavericktruckclub.com/forum/threads/are-mx-topper-cargo-mods.37285/

love it, I gotta look into that

 

[caa60126]

How much does that cap run?

basic Jason Trek was quoted at 2500
flat black is 225
front fold-down picture window is 80
carpeted sides/headliner 140
rhino-rack tracks 220
tax 117.11

3282.11

I hoped to get the side window flip-up/sliders but they said only sliders were available.

 

[caa60126]

If you are interested in a topper you might take notice of the c-clamp attachment, I am sure it's fine, hopefully it doesn't get in the way of cargo, but my old ARE was bolted on and IMO looked better than the clamps, something I never thought to ask the salesman. S-Cargo in Loveland is a good company to work with, as was Garf Ford in FoCo.

I took it through a brush car wash today, and there were very slight droplets of water on the bottom edge of the front window, hardly worth mentioning.

 

[Maverickman74]

basic Jason Trek was quoted at 2500
flat black is 225
front fold-down picture window is 80
carpeted sides/headliner 140
rhino-rack tracks 220
tax 117.11

3282.11

I hoped to get the side window flip-up/sliders but they said only sliders were available.

Since you have the headliner the nuts on the inside are probably above that if you ever want to do the hanger mod. I like it sandwiched the way I did because the inside strength is essentially the same as the roof rail strength. Really just limited by the aluminum I used. I did hang 2 heavy backpacks and a grocery bag from one hook and did the road to Hana on Maui. Didn't notice any wear or flex. One day I may do a piece side to side at the front and rear front even more stability.

 

[caa60126]

Since you have the headliner the nuts on the inside are probably above that if you ever want to do the hanger mod. I like it sandwiched the way I did because the inside strength is essentially the same as the roof rail strength. Really just limited by the aluminum I used. I did hang 2 heavy backpacks and a grocery bag from one hook and did the road to Hana on Maui. Didn't notice any wear or flex. One day I may do a piece side to side at the front and rear front even more stability.

Fun memories x2 regarding The Road To Hana!

 

[TNFurb]

I really like the fitment of that cap!

 

[Maverickman74]

Fun memories x2 regarding The Road To Hana!

If you stopped at Twin Falls you might have seen me at work.

 

[801Maverick801]

Do they have an option without side windows?

Sponsored