Will these wheels/tires fit or not?

[EONR24]

I am curious if the "NEW SETUP" picture below is going to be too close to the Maverick's Suspension Components! Someone out there let me know if this will be ok or not!

Sponsored

 

[EONR24]

Bump will there be enough clearance with this set up? says wheel/tire will sit 30 mm closer to the suspension about 1.25 inches.

 

[Mervin the Maverick]

Did you try Tire Rack or Discount Tires Websites to see what they say?

 

[EONR24]

Did you try Tire Rack or Discount Tires Websites to see what they say?

Yes. Because the wheels are not OEM Maverick wheels they are 18x8 instead 18x7 and have a different offset, those websites don't know. Thanks for the suggestion though!

 

[Hot Runr Guy]

Do you have access to a short piece of 2x2 or 2x4, which is 1-1/2" thick? If so, you could see for yourself if you have that much room on the back-side of your existing tires/wheels, check with wheels straight and at both fully turned positions.

HRG

 

[EONR24]

Do you have access to a short piece of 2x2 or 2x4, which is 1-1/2" thick? If so, you could see for yourself if you have that much room on the back-side of your existing tires/wheels, check with wheels straight and at both fully turned positions.

HRG

Good idea. How would I test if say I hit a bump? would their be less clearance when the suspension is under load??

 

[Hot Runr Guy]

Good idea. How would I test if say I hit a bump? would their be less clearance when the suspension is under load??

Maybe use a floor jack to get some vertical travel? What is so special about that particular wheel that you have selected it? Do they not offer other widths/offsets?

HRG

 

[EONR24]

Maybe use a floor jack to get some vertical travel? What is so special about that particular wheel that you have selected it? Do they not offer other widths/offsets?

HRG

So I have an OEM FOCUS ST Wheel SET they are 18x8 55 offset instead of 18x7 38 offset of the factory maverick wheels.

 

[FischAutoTechGarten]

THat's approaching 3/4" difference inboard on each side.

 

[EONR24]

THat's approaching 3/4" difference inboard on each side.

Yeah is that too close? I won't run the wheels if that's the case

 

[EONR24]

THat's approaching 3/4" difference inboard on each side.

its actually about 1.15inches closer to the inside on each side. Will they fit? Will they work

 

[AzureBlueBill]

They will most likely work O.K. But just to be sure, I'd try to find a +45mm offset wheel instead.

 

[EONR24]

They will most likely work O.K. But just to be sure, I'd try to find a +45mm offset wheel instead.

why won't a 55mm offset work

 

[Superg0]

Are these your wheels?

https://www.mavericktruckclub.com/f...painted-brakes-calipers-splash-graphics.4819/

 

[EONR24]

Are these your wheels?

https://www.mavericktruckclub.com/f...painted-brakes-calipers-splash-graphics.4819/

I have different wheels but I just checked and they are the same specs as those snowflakes. Thanks for the link! I might run bigger tires but still they fit it looks like. I am just worried about inside clearance

Sponsored