Tremor bad azz front end and opinion.

[HenrysDad]

Think about it
https://www.mavericktruckclub.com/f...-installed-on-2023-atlas-blue-maverick.26023/

Nah. Looks like it's trying too hard. Like those F150 owners who put Raptor grilles on their XLT trims.

Sponsored

 

[Joaquin F]

Looks sick, man The front end has a perfect balance right now; aggressive but not overdone.

I’m actually with you on the stock Tremor grille. It fits the truck really well and keeps it looking OEM+ instead of “trying too hard.”

As for the round lights… I kinda like the throwback hot rod look They stand out, but in a good way. If you’re digging them, that’s what matters.

Raptor LEDs would be a nice touch if you want a little extra flair, but honestly, it already looks dialed in.

Nice setup

 

[sprubs]

Bro I love the pushbutton! Looks clean. This is the reason why I didn't go with fog lights from diodedynamics; the button was stick on and didn't look stock.

agreed that the button install looks good. did this involve pulling that panel out and drilling a hole in it?

 

[Cherokee]

He disagrees:

Yeah he’s got rounds ones up top also.
That looks right !

This life would be so boring if we all agreed on everything.
Many opinions in the collective community. It’s what makes us who we are.

Or every little house would be pink and we’d have only one pick up truck in this country and they all would be silver.
It would be the F-150.

See what I mean ?
:’P

 

[mspmms]

I agree but the round lights trip my trigger.

Meme => link

 

[EVH5150]

Looks good. I originally had the 7" version of those lights, but they were too big and way out of scale for the Maverick; your 5" ones look right. I ultimately went with the DD SS3s and am very happy with them. If you're considering doing Raptor-style LEDs, take a look at the Oznium 6mm Bolt Lights.
LED Bolt Flush Mount Lights | IP68 + 12 Volt | Oznium LEDs
I'll post some pics of mine when I get home tonight. There might be some in my Build Thread.

 

[Darthie]

Yeah he’s got rounds ones up top also.
That looks right !

This life would be so boring if we all agreed on everything.
Many opinions in the collective community. It’s what makes us who we are.

Or every little house would be pink and we’d have only one pick up truck in this country and they all would be silver.
It would be the F-150.

See what I mean ?
:’P

100%

 

[Darthie]

agreed that the button install looks good. did this involve pulling that panel out and drilling a hole in it?

Yes. It was simple to pop out.

Looks sick, man The front end has a perfect balance right now; aggressive but not overdone.

I’m actually with you on the stock Tremor grille. It fits the truck really well and keeps it looking OEM+ instead of “trying too hard.”

As for the round lights… I kinda like the throwback hot rod look They stand out, but in a good way. If you’re digging them, that’s what matters.

Raptor LEDs would be a nice touch if you want a little extra flair, but honestly, it already looks dialed in.

Nice setup

Thanks appreciate it.

 

[Darthie]

It’s getting cold here in Fl so l ordered a pair of these to put on before bed so these babies stay warm.

 

[Sticks]

The color-matched lamp bezels are a great touch. It's tasteful. I think "raptor lights" might look too cluttered.

Fun fact: they're actually called identification lamps, and they're legally required to indicate the presence of an abnormally large vehicle (greater than 2032mm wide, per FMVSS 108). Raptors don't have them for looks.

As a former lighting designer and engineer, I view "raptor lights" as just another "big truck"-style modification. It's questionable when sincere, but pretty funny when it's deliberately ironic.

(not my car)

 

[JTBII]

Came out pretty good from my point of view. Should I add the Raptor 3 LED's??

Looks great, and yes add the Raptor 3 LED’s, really sharp.

 

[Toymaster]

It’s getting cold here in Fl so l ordered a pair of these to put on before bed so these babies stay warm.

No hate here, if you need the light it looks good. I would offer that using clear hard covers is the way to go as you will never pull the covers off, so you'll never use the lights.

 

[EVH5150]

Oznium 6mm bolt lights in amber, Diode Dynamics SS3 combo beams and SSC2 amber fogs on JJC brackets

And switches in brake controller panel; these control the driving lights and ditch lights. Plus OEM F150 headlight control with foglight switch with BCM mod.

 

[Darthie]

Oznium 6mm bolt lights in amber, Diode Dynamics SS3 combo beams and SSC2 amber fogs on JJC brackets

And switches in brake controller panel; these control the driving lights and ditch lights. Plus OEM F150 headlight control with foglight switch with BCM mod.

How are the wires dressed under the hood for the LED's.

 

[EVH5150]

Bumper cover needs to come off, grill insert gets removed, holes drilled for LEDs, then reassembled. Leads for LEDs bundled and wire-loomed, then run out behind headlight. I put a DT connector on the end. Then opposite DT connector ran to a plug-and-play adapter for the DRLs (I have a Lariat).

Sponsored