XL bed outlets and light installed

[Mac23]

This is my cheap USB/12V socket and bed light solution. Panel, switches, and light all from amazon. The socket panel originally had a voltage display, but I removed it and added a switch. One switch for both outlets, and one for the light. The light required a little trimming to fit as the supplier's measurements didn't include the bezel and I wanted it to sit flush in the recessed part of the panel.

Sponsored

 

[WenzelR]

Nice!

 

[BoboysTruck]

Nicely done.

 

[Fairlawn_Maverick]

This is my cheap USB/12V socket and bed light solution. Panel, switches, and light all from amazon. The socket panel originally had a voltage display, but I removed it and added a switch. One switch for both outlets, and one for the light. The light required a little trimming to fit as the supplier's measurements didn't include the bezel and I wanted it to sit flush in the recessed part of the panel.

Do you have a link for the light and outlets? Also do you have a write up in the install?

 

[Mac23]

Do you have a link for the light and outlets? Also do you have a write up in the install?

These are the parts I used. Didn't do a write up with pics. Simple wiring. All negatives together and two switched positives from the factory bed 12v supply.

 

[metalman329]

You can buy extra 12v pigtails on eBay…

https://www.ebay.com/itm/185420264433

 

[y2kmetal]

Very impressive. Thanks for sharing. I have the XL too. I will try to do the same, probably adding another outlet for 115v. Have to figure out where to put it.

 

[pndwind]

Have you had a chance to try the light? Just wondering how well it lights everything up.

 

[Mac23]

Have you had a chance to try the light? Just wondering how well it lights everything up.

This one isn't super bright. Just wanted some light for rigging fishing poles at night /unloading camping gear without being obnoxious to neighboring campers.

Sponsored