What happened to BCM module in Forscan?

[YazYaz]

I decided to join the crowd and change my battery charge setting using Forscan. It's been a while since I've used Forscan so I was surprised when I after I connected to my Maverick, I couldn't find the BCM module. Neither "as built" or "easy mode". There was a BCM_(?) (I forget the letter) and there was a BECM (as built) module. Does anyone know where the BCM easy mode module can be found?

Sponsored

 

[HeyBales]

I decided to join the crowd and change my battery charge setting using Forscan. It's been a while since I've used Forscan so I was surprised when I after I connected to my Maverick, I couldn't find the BCM module. Neither "as built" or "easy mode". There was a BCM_(?) (I forget the letter) and there was a BECM (as built) module. Does anyone know where the BCM easy mode module can be found?

Could they just be calling it the Body Control Module?
But I think the controlling PID you want at 85% is elsewhere - I was looking the other night and couldn't find it.

Forscan Lite calls them this in it's report:

BdyCM - Body Control Module
Bus: HSCAN
Part number: MU5T-14B476-FCU
Calibration level: MU5T-14B476-FCU
Strategy : MU5T-14C184-ACR

BCM_C - Body Control Module C
Bus: HSCAN
Part number: LX6T-14D068-HAG
Calibration level: LX6T-14D068-HAG
Strategy : L1MT-14G630-BH
Calibration: LX6T-14G631-AG

The PID names use the 1st one.

 

[DesertSandTremor]

It may not be reading in the HS Can mode or an adapter issue. I just updated the BCM this morning on my 25 EB. I was using Forscan 2.3.67 for windows. If you're using an app, then it may just not be reading the module properly with the adapter you have.

 

[YazYaz]

It may not be reading in the HS Can mode or an adapter issue. I just updated the BCM this morning on my 25 EB. I was using Forscan 2.3.67 for windows. If you're using an app, then it may just not be reading the module properly with the adapter you have.

I'm using the same Windows version. Im not sure what you mean by "adaptor". What were you updating in your Eco Boost?

 

[DesertSandTremor]

I'm using the same Windows version. Im not sure what you mean by "adaptor". What were you updating in your Eco Boost?

The ELM327 adapter. I was changing settings for adding fog lights and power point time-out.

 

[charlesb]

fallowing since i see the same thing as you do

Sponsored