Sponsored

Roof crossbars compatible with Elevate bed rack

Cruzer

2.5L Hybrid
Member
First Name
Adrian
Joined
Nov 25, 2024
Threads
1
Messages
14
Reaction score
4
Location
Santa Cruz, CA
Vehicle(s)
2024 Maverick Lariat Hybrid
Engine
2.5L Hybrid
Clubs
 
Ford Maverick Roof crossbars compatible with Elevate bed rack IMG_4323

This is a great example of a situation where having crossbars on the cab would help keep longer loads from banging the roof . Can anyone recommend a set of roof crossbars to use with a bed rack? I am looking for something that is easy to put on and take off.

This is my first load on the rack and post! - 24 Maverick Lariat Hybrid Fwd with BAK Revolver tonneau cover with t-track and Truxedo Elevate Bed Rack
Sponsored

 

StevePlusPlus

2.5L Hybrid
Active member
First Name
Storb
Joined
Jan 25, 2025
Threads
4
Messages
28
Reaction score
116
Location
NY
Vehicle(s)
25 Hybrid AWD 4Ktow
Engine
2.5L Hybrid
I have the same bed rack as you and made a post about using it with a roof rack (I had a lot of details so I figured it warranted it's own thread).

I know you were asking for something easy to take on an off, and I'll say the Yakima roof rack is easy to take off, but a bit harder to put on. You're supposed to place its feet on certain spots which can be a hassle to measure, but if you put some sort of mark (maybe a small piece of vinyl or permanent marker?) to let you know where to place things it probably wouldn't be too bad. Then you use a special hex wrench to get things in position and tighten them down.
 
OP
OP
Cruzer

Cruzer

2.5L Hybrid
Member
First Name
Adrian
Joined
Nov 25, 2024
Threads
1
Messages
14
Reaction score
4
Location
Santa Cruz, CA
Vehicle(s)
2024 Maverick Lariat Hybrid
Engine
2.5L Hybrid
Clubs
 
Thanks for the reply. I will check out your thread. Yakima makes good equipment and I am sure I could come up with an easy way to mark the location. Both your suggestions would work.
Sponsored

 
 







Top