Power steering, ABS, Driving modes disabled

[dubya774]

Hey everyone. I was driving to work this morning in the rain in my 2022 2.0L AWD when the dash lights lit up like a Christmas tree. Precollision avoidance disabled, AWD disabled, ABS disabled, Hill Start Assist disabled. Also, the power steering isn’t working.
Has anyone seen this? It is similar to SSM 50771 but my truck was built in OCT22 after this was resolved. Has anyone seen this or have a solution? I used VCM scanner to check for a DTC and there are no PCM codes, but I do not think the MPVI2 reads the PSCM or ABS module.

Sponsored

 

[dubya774]

@Ford Motor Company can you help?

 

[NoVaJimmy]

@Ford Motor Company can you help?

I don't think they actually do anything, I'm pretty sure they just take VINs and log them into a database with the problem so they can see if there's a pattern or widespread occurrence and link them to possible production or supplier part issues. Your best bet is to contact your dealership if you want anything addressed. Good luck

 

[dubya774]

I don't think they actually do anything, I'm pretty sure they just take VINs and log them into a database with the problem so they can see if there's a pattern or widespread occurrence and link them to possible production or supplier part issues. Your best bet is to contact your dealership if you want anything addressed. Good luck

Thanks! I am aware, but unable to visit the dealer for the next few days and if there is something I can do then I’ll take any advice I can get.

 

[Darnon]

Similar instance although they never reported what the actual fix was other than they had codes for a wheel speed sensor error.

IIRC there's also been some similar with bad wiring harness terminals or connector not fully latched, but I can't locate them on a quick search.

 

[Ford Motor Company]

Hey everyone. I was driving to work this morning in the rain in my 2022 2.0L AWD when the dash lights lit up like a Christmas tree. Precollision avoidance disabled, AWD disabled, ABS disabled, Hill Start Assist disabled. Also, the power steering isn’t working.
Has anyone seen this? It is similar to SSM 50771 but my truck was built in OCT22 after this was resolved. Has anyone seen this or have a solution? I used VCM scanner to check for a DTC and there are no PCM codes, but I do not think the MPVI2 reads the PSCM or ABS module.

Hi there, I'd be happy to look into your Maverick concerns on my end. Will you send us a message with your VIN and dealership info? I can look into things on my end.

 

[Zotman]

Simple check is to verify tight battery terminal connections.

Sponsored