JCR Tremor engine skid?

[fossil]

Advertised as Maverick not Tremor the video makes it obvious. Cannot verify if oil change is possible with skid in place.

https://www.jcroffroad.com/product/BSSD-GN-1G.html

Sponsored

 

[gunnmitten]

they could definitely do with specifying the Tremor trim, are non-Tremors compatible with both plates shown?

 

[fossil]

they could definitely do with specifying the Tremor trim, are non-Tremors compatible with both plates shown?

product page is crude but the video is only 2 days old so maybe they'll fix it up given time.
I would guess non Tremors need a different product.

 

[Maverickman74]

Did they make a felt replacement too or is that a Bronco Sport?

Never mind, I looked it up. One day they will take care of it. Or maybe I will do that single sheet style like that one member did.

 

[Rivers90]

This photo shows 4 after market skid plates. Front under engine and trans, middle one under the CAT and 2 side ones.
The photo looks like the Tremor.
Good news it looks like we have a full set of skid plates coming from JCR!
Only the engine and cat skids are for sale right now, but the photo shows two more skids for the sides.

From the JCR website it looks like the Maverick part number is
BSSD-GN-20
For the under engine transmission skid.

 

[Hot Runr Guy]

As we've learned from the flat-tow crowd, there is a difference between the "standard" lower valance and the FX4 version, as far as underside length. My guess is that this does not fit a non-FX4 Maverick.

HRG

 

[Montana]

As we've learned from the flat-tow crowd, there is a difference between the "standard" lower valance and the FX4 version, as far as underside length. My guess is that this does not fit a non-FX4 Maverick.

HRG

Sadly, still no good options exist.

If they do make 4 plates though - that is awesome. I'm willing to bet the other ones would fit an FX4. Hopefully some clarification soon, and/or possibly even a version that does fit the FX4. I absolutely HATE this two part design.

 

[fossil]

This photo shows 4 after market skid plates. Front under engine and trans, middle one under the CAT and 2 side ones.
The photo looks like the Tremor.
Good news it looks like we have a full set of skid plates coming from JCR!
Only the engine and cat skids are for sale right now, but the photo shows two more skids for the sides.

@Rivers90 and @Maverickman74 found the Easter egg I planted with the OP photo. Was wondering who the eagle eye would be. Maverickman74 spotted something fishy and Rivers90 landed it.

IMO it shows their Tremor test mule with the side plates and the rock rails. On the Sport the rails are an add on that requires the side plates.

Good news for all is the sides and rails will likely fit all adventurous Mavericks.

 

[710-oil-614]

I came here to say (too late) that screw the engine skid plate (we already have one) how about those side skids!!!!!

 

[Rivers90]

Your right. I see the rock rails now. Wow this will be a full set of skid plates. These really up what you can do with a Maverick. I love it.

Sponsored