Help - Setting flipped my homescreen

[MG-PVU]

Anyone know. I changed a bunch of settings and my home page top bar swapped. Android auto and contols are on the right and factory side screen is now on the left?

Sponsored

 

[Digger-BC]

Check if it's set for left driver?

 

[MG-PVU]

Yes its correct.

 

[El Kabong]

Maybe just try a reboot or reset?

Reboot:
You can reboot the center display using the controls on the steering wheel or on the dashboard.
1. Simultaneously press and hold the seek forward and audio system power button for 10 seconds.

Reset:
1. Press Settings on the touchscreen.
2. Press General.
3. Press Reset.
You can perform multiple resets from this menu.

Let us know if any of this works.

 

[MG-PVU]

If there are any 2026 Lariat Hybrid owners out there willing to help with screenshots of their Forscan modules, I would be in debt.

 

[MG-PVU]

Maybe just try a reboot or reset?

Reboot:
You can reboot the center display using the controls on the steering wheel or on the dashboard.
1. Simultaneously press and hold the seek forward and audio system power button for 10 seconds.

Reset:
1. Press Settings on the touchscreen.
2. Press General.
3. Press Reset.
You can perform multiple resets from this menu.

Let us know if any of this works.

I will try this but I tried the reset and no resolution thus far.

 

[El Kabong]

Need our Forscan experts to find the thread.

 

[Digger-BC]

I've got the xlt not the Lariat

 

[MG-PVU]

I reloaded factory settings to fix it. Need to start over.

 

[Robot-Wrangler]

I reloaded factory settings to fix it. Need to start over.

That usually fixes Forscan oopsies.

 

[grumpyunk]

In case someone comes by later, the 'as built' files can be downloaded from a FoMoCo site. In the case where the installed and active files are scrambled, replacing with the originals should set things back to factory settings.

 

[MG-PVU]

This is what caused it. Pretty sure.

Navigation in Motion (Lariat only)(USA only)ACM*"""727-04-01"""
APIM*"""7D0-02-01"""

 

[710-oil-614]

I changed a lot of settings IN FORSCAN is a nice bit of info the OP left out originally.

 

[El Kabong]

I changed a lot of settings IN FORSCAN is a a nice bit of info the OP left out originally.

Yes, but OP did post in the correct forum

 

[710-oil-614]

Yes, but OP did post in the correct forum

Fair enough. I accept that.

Sponsored