Headliner removal instructions?

[shazel]

curious what deadning materials you used and if you found it helped at all with wind noise?

Killmat 80mil https://a.co/d/7A1RgvT
Siless closed cell foam 157 mil https://a.co/d/iVQBRbE

Helped with wind noise and also makes driving in the rain nicer.

Sponsored

 

[RanCheeto]

Has anyone pulled the headliner? I bumped the shark fin on my garage door and now its not sitting flush against the roof.

Any help or photos would be appreciated. Thanks!

Crazy how a thread gets hijacked. Subject was antennae fix. I am sure you figured it out long ago, but for the next person....

I also bumped the sharkfin and pulled it up. I watched this video (it's great for the C-pillar info.)

However I was able to remove just the drivers side C-pillar covers and then lower the corner of the headliner. You can reach in from the side or the rear sliding window if you have one. I removed the bolt, tapped the bent edges back, put some touch up paint on it and reassembled. The whole process took less than half an hour.

 

[ofcbc]

this may help

Goodness, I just want to hide some wires instead of shoving them in the edge of the liner, but that is too much work!

 

[Early66]

Concerning the headliner fit across the back window. Mine is secured above the window at both ends (the corners) but hangs free/dips down across the middle. There is about an inch gap between the metal roof and headliner. The back courtesy light seems to be the only thing holding it up. Aren't there some clips for across the middle above the window?

Sponsored