Concerning the headliner fit across the back window. Mine is secured above the window at both ends (the corners) but hangs free/dips down across the middle. There is about an inch gap between the metal roof and headliner. The back courtesy light seems to be the only thing holding it up. Aren't...
Today, running FORScan ver 2.3.67, connected to the truck with the OBDLink EX and let it run a new vehicle config.
In the BdyCmd Module: Set BMS/Auto stop start system = Disable
In the PSCM Module: Set Start Stop = Disable.
This works in my truck. No DTCs. The engine continues to idle during a...
Today, connected to truck with the OBDLink EX and loaded the vehicle config it saw (after deleting the FORScan config originally made with the VLinker FS USB).
Concerning the Start/stop parameters, I found two in the EZ editor:
IN BdyCM Module
BMS/Auto stop start system = enabled (by the way...
OK. Went and got the recommended OBDLink EX. I am using Forscan version 2.3.67 and it sees the PSCM. In easy mode, that parameter, is just an enable disable for the configuration and there is no other values etc. like in other modules. Is that the parameter to change? It is just a "switch"? I...
Wanting to disable the Start/Stop on a 2022 Maverick XLT AWD I own. Having an issue during the file backup/changing.
During backing up files, the PSCM module (which the Master spreadsheet has listed for the enable/disable) does not show up in the list of "Modules Found". FORScan also states it...
Thank you for the replies and info. My truck came without the tow package and I was thinking of putting on a hitch just for a small fishing boat. Has anyone added a hitch? Was there anything that needed enabled?
I read where there was issues with the headliner not fitting properly around the 'A'...
Hello. I have been "lurking" around this site for some time and finally traded for a 2022 AWD XLT. Got the OBDII adapter and FORScan. It loaded up and it plugged in/fired up ok with no issues. I believe it showed 11 (?) modules it connected to/could see. Saved the configuration. Is there an...