- First Name
- Garry
- Joined
- Jan 2, 2022
- Threads
- 16
- Messages
- 292
- Reaction score
- 347
- Location
- Pensacola, FL
- Vehicle(s)
- Ford Maverick XLT FX4 Atlas Blue
- Engine
- 2.0L EcoBoost
- Thread starter
- #1
I finally got cruise control installed (changed both switches) and programmed, but now the airbag light stays on and I can't get the airbag back off to check if I got the wiring properly seated. To be honest, I really don't know how I got the airbag off in the first place. When I applied pressure, nothing happened. I was about to give up when I noticed one side had popped out, so I continued with the other side until it popped out too (still don't know how I did it). I tried the second time for almost 2 hours and couldn't get the the airbag off to check the wiring plugs. At one time, I applied so much pressure, I was afraid I was going to bend my screwdriver. Cruise control works great. I tested it from 20mph up to 75mph and it works as it should. Any one have any idea what I'm doing wrong to get the airbag out? I've tried heavy and light pressure.
Any ideas would be greatly appreciated
Any ideas would be greatly appreciated
Sponsored