Flex Bed wood divider measurements

[danielmartinez20]

Hello, does anyone know the exact measurments of the wood pieces needed to create divisions in the truck's bed?

I'd like to buy in advance of receiving my truck something more durable than wood like the following, also recommended in another thread:

https://www.markstaar.com/2-x-4-x-8-Recycled-Plastic-Lumber-2496.html

Sponsored

 

[Hack]

Hello, does anyone know the exact measurments of the wood pieces needed to create divisions in the truck's bed?

I'd like to buy in advance of receiving my truck something more durable than wood like the following, also recommended in another thread:

https://www.markstaar.com/2-x-4-x-8-Recycled-Plastic-Lumber-2496.html

Cool idea! I was going to buy stock lumber then paint it black anyhow.

 

[Sylvester]

Here we go, all the details are in this Video:

 

[SgtLip]

I'm in Florida and just added 2 pieces of 2" x 6" x 8' and am getting a quote. My guess is it will cost as much as the Maverick costs to ship it to me if they even will.

 

[danielmartinez20]

Here we go, all the details are in this Video:

Thanks for this! Though I believe that the devider that goes closer to the tailgate has a different length, since it spans the whole width of the bed.

 

[deadeye]

Thanks for this! Though I believe that the devider that goes closer to the tailgate has a different length, since it spans the whole width of the bed.

A naked bed was measured at 43.75" in the front divider slot and 54.5" for the rear slot.

Looks like they have a drop in liner in the Video, so if they say to make the front divider 43.25" then I would make the rear divider 54" to fit with a drop in liner. I assume the spray in liner would take up slightly less space, so maybe somewhere in between the naked and drop-in liner dimensions for the spray in liner.

 

[CoryDallas8123]

Make sure to cut twice and measure once. Wait, that doesn't sound right.

 

[sprcoop]

I'm curious what is the distance from the inside of the closed tail gate to the trailing edge of the 2X6 slot in the back. As is how large of a box/object will fit between the tailgate and the 2x6 board.

Looks like about 14" but I would love to know an exact measurement.

Trying to satisfy curiosity before mine (hopefully) shows up.

 

[Sembazuru]

Here we go, all the details are in this Video:

Hmm... Anyone want to share their notes? The video is showing as private to me:

 

[SleepySin]

Hmm... Anyone want to share their notes? The video is showing as private to me:

Seems that your video link is dead?

 

[Sembazuru]

Seems that your video link is dead?

That isn't my video link. I was attempting to show to @Sylvester that his video link is dead.

 

[Shakesbear]

I'm curious what is the distance from the inside of the closed tail gate to the trailing edge of the 2X6 slot in the back. As is how large of a box/object will fit between the tailgate and the 2x6 board.

Looks like about 14" but I would love to know an exact measurement.

Trying to satisfy curiosity before mine (hopefully) shows up.

15 1/4" with a spray-in bedliner

 

[sprcoop]

15 1/4" with a spray-in bedliner

Thanks, I appreciate the info.

 

[TheWizziard]

I bought 2 - 8' 2"x6"' and cut to fit.

The dimension is approximately 54.5' but will vary depending on if and what kind of liner you have.
And also how tight you want them to fit.

Sponsored