Flex Bed 12v power on passenger side not driver side [SOLVED]

[wishtx]

Hey yall, been trying to track down why the 12v Flex Bed power source is only present on passenger side of bed and not driver side. They’re on the same circuit, already checked the engine bay fuse, and when I installed the Mabet drivers side body cavity cover I checked physical connection of the plug, appears to be g2g. Any idea why the passenger side is only one getting power? ‘25 Maverick XL AWD EB. Thanks!!

Sponsored

 

[BlueSpec1]

Position 63?, 64? https://www.startmycar.com/ford/maverick/info/fusebox/2025

25 wiring shows a fuse for each side.

 

[wishtx]

Well, guess I’ve got another fuse to eyeball. Everything googled indicated only one shared fuse, albeit I admit I didn’t pay attention to what years those posts referred to. I’ll take a look and see what I find, thanks!

 

[Quest]

Ford split it into 2 circuits in 25

 

[wishtx]

Was indeed the second fuse. Will be saving that link above. Thank yall!

**Edit**
Figured I’d attach an image of what I ended up able to install after the fix. Four switch panel, first switch set up with inverter to power 110v outlet, USB-A/C port, 12v port and three remaining 12v switches for any future use found

Sponsored