Center Cap Sizing

[MavvyBoy]

Hello everyone,
I have been rocking the steelies with the hub caps for quite some time now and decided to switch it up by painting the steelies black and adding some small caps with the Ford logo. I bought these (1 pictured below) off of eBay, and it turned out they were too small. I also realized that even if they fit, it would be a weird fit for the front two wheels (2 pictured below). If anyone has any cheapish suggestions on the small center caps that could fit on the Mav. I would greatly appreciate it! Thank you for your time!
(1)

(2)

(3)

Sponsored

 

[Hot Runr Guy]

I think you need to look at something like these, that snap on to the lug nuts. https://www.hubcaphaven.com/p/27642/c99079-ford-maverick-silver-oem-center-cap-nz6z1130a.html

HRG

 

[fossil]

is this what you bought?

https://www.hubcaphaven.com/p/26269/c96452-ford-explorer-oem-black-center-cap-6m2z1003c.html

 

[MavvyBoy]

@fossil I actually bought em on Ebay but theyre the same size as those yes. any others you know fit?

 

[fossil]

if 2-1/8" is correct search 54MM (Bronco Sport size) center caps Amazon

 

[MavvyBoy]

@fossil The 54MM (2 1/8) actually doesnt fit. Seems to be small for the Mav.

 

[Hot Runr Guy]

Once again, I do not feel that there is an insert that fits the steelies you have, only the aluminum wheels use a decorative center cap. The hubcap I posted earlier is meant to work with the steelies, but if you insist on trying to find something, below is the center bore size.

HRG

 

[MavvyBoy]

Once again, I do not feel that there is an insert that fits the steelies you have, only the aluminum wheels use a decorative center cap. The hubcap I posted earlier is meant to work with the steelies, but if you insist on trying to find something, below is the center bore size.

HRG

@Hot Runr Guy Im basically trying to replicate these: https://www.mavericktruckclub.com/f...s-on-bfgoodrich-ko2-245-65-17.3785/post-85238
Just need to find the exact option or something similar.

 

[Hot Runr Guy]

@Hot Runr Guy Im basically trying to replicate these: https://www.mavericktruckclub.com/f...s-on-bfgoodrich-ko2-245-65-17.3785/post-85238
Just need to find the exact option or something similar.

I understand what you're trying to accomplish, I just don't know how to get there. Unfortunately, @idkuffel has been asked multiple times for a part # or link, and has failed to respond.
HRG

 

[MavvyBoy]

I understand what you're trying to accomplish, I just don't know how to get there. Unfortunately, @idkuffel has been asked multiple times for a part # or link, and has failed to respond.
HRG

Got it. Thank you for the information! Greatly appreciated

 

[Onip]

I have mesured the center hub and it's 56 mm. I bought some cap on amazon. When I installed them, I'll post some pictures.
for the back, it’s 57mm. So with a fatter seal ring, it will hold.

search
Aramox Hub Cap, 4pcs 56mm/2.2in Universal Wheel Rim Center Cap Hub Cover Aluminum Alloy Modified Part (Black)

 

[Onip]

Here’s the final result.

 

[LSchicago]

54mm is correct for aluminum wheels, not steel.

 

[Solostian]

Here’s the final result.

I'm looking for a similar (non black) solution.
Can you show more pictures?
The different installation steps?

 

[Montana]

I wish my wheels were that easy.

Stupid aftermarket AlphaEquipt wheels have a lip on the outside and a different inner diameter that bevels in just enough to prevent any of the ones I've looked at from grabbing. I wrote about it here and the following posts as well:

https://www.mavericktruckclub.com/f...ick-22-lariat-lux-fx4-4k-eb.33672/post-625232

I tried ordering decals from Etsy and they never shipped. I hate Etsy. Had to wait almost two months before I could file a claim as the seller was from China but they were the only ones I saw that looked decent. Anyways... glad you got yours. I have to suck it up and not use the FORD emblem on my wheels.

Sponsored