Bluetooth bed speakers installed

[ladyhawkgt]

Oh, of course, after I already purchased with bottom only. Does anyone know how I can get just the side covers without needing to order the bottom.

you might try Bedrug themselves, but i believe they zip together, so if you don’t have zips i’m not sure?

Sponsored

 

[Dad]

you might try Bedrug themselves, but i believe they zip together, so if you don’t have zips i’m not sure?

Thanks, I'll look around. Not a "must have" at this time, but had I initially known about the sides, I believe I would have included them.

 

[ladyhawkgt]

Thanks, I'll look around. Not a "must have" at this time, but had I initially known about the sides, I believe I would have included them.

initially, they did not have the whole cover, but Ford does not sell it anyway as far as i know.

 

[Dad]

initially, they did not have the whole cover, but Ford does not sell it anyway as far as i know.

You are correct. I purchased from Ford (Points) and there was no option for the side coverings. Thanks for the info.

 

[Ricstar]

No need and would never use, but DAMN THAT IS GREAT!!!!!

 

[AllBlkMav]

The bed is done. I added some Pyle marine Bluetooth speakers. LED strips, switches and USB ports from Amazon. The speakers run independently of the truck's sound system - so mostly for when I'm working outside or hanging out. They're waterproof and made for marine applications, and sound decent for a bluetooth speaker system. The power is switched there, the factory bed power supply runs for about an hour and a half after you shut the truck off, and the usb port has a volt meter so I can keep an eye on the battery level. These are 6" speakers, and are just a little big, necessitating cutting the switches and ports back just a bit to fit. If I could have found 4 1/2" speakers, that would have been better, and would have allowed use of a couple of cubbies

Dope install

Sponsored