Sponsored

Any front axel failures without a lift kit? - Moved to correct forum

TREX10

2.0L EcoBoost
Well-known member
First Name
Toni
Joined
Sep 23, 2021
Threads
8
Messages
87
Reaction score
93
Location
Houston, Texas
Vehicle(s)
2011 4Runner 4x4, 2003 Tacoma PreRun, 2005 Liberty
Engine
2.0L EcoBoost
Dealership originally told me that a lift would not void the warranty and I had a 2" Rough Country installed by 4 Wheel Parts.
After less than 5,000 miles, the front end started to shimmy and the dealer is saying the lift caused it and is NOT covered by warranty.

If the lift genuinely cause it - so be it. Hopefully, 4 WP will work with me but I've never had a 2" lift on any vehicle be a problem!

I did read through one thread with axel failure but it also had a lift.

Anyone else??
Sponsored

 

Deleted member 12286

Guest
I have a 2” lift with no issues.
I did it myself to make sure it was done right. Almost each post I read like this is companies installing the lifts.
Makes you wonder.
I have 4600 mile on mine.
 
OP
OP
TREX10

TREX10

2.0L EcoBoost
Well-known member
First Name
Toni
Joined
Sep 23, 2021
Threads
8
Messages
87
Reaction score
93
Location
Houston, Texas
Vehicle(s)
2011 4Runner 4x4, 2003 Tacoma PreRun, 2005 Liberty
Engine
2.0L EcoBoost
I have a 2” lift with no issues.
I did it myself to make sure it was done right. Almost each post I read like this is companies installing the lifts.
Makes you wonder.
I have 4600 mile on mine.
That's awesome! I hope it lasts - mine is just about that mark and had no leaks on garage floor and I only drive it 2-3 days a week. Yesterday it gave out.
It was installed by a very reputable shop, so I expected it to be done correctly. I actually shied away from doing it myself for that reason.

I'm wondering if there have been failures that weren't lifted!

Thanks for responding.
Sponsored

 
 







Top