- Thread starter
- #61
that souns like a good idea! thanksYeah for a big jack bed mount I was thinking take a 2x8 cut it to fit the wheel well slots in the front of the bed. Roll ye jack up in there with the handle to the front. Take a piece of cardboard and fit a tight cut out pattern around the jack body. The replicate that on the 2x6. A tight fit on everything oughta lock it in place pretty nicely. A safety nanny could sort out a bolt or pin or something for it to keep it down. Also could screw a second board across the top to reinforce it since its a cut piece. Angle aluminum could work as well. Or just put it under the rear seat with a piece of old carpet underneath to protect the cubby and be used as roadside knee pad.
Sponsored