Cell Phone Holder recommendations?

[sophiam]

What cell phone holder have you purchased that either uses the cubby or is mounted on the dash area, and that doesn't shake while driving? I'm returning a second one that didn't work out and need a link to one that has shown to work. Thanks in advance!

Sponsored

 

[MAVRICK]

What cell phone holder have you purchased that either uses the cubby or is mounted on the dash area, and that doesn't shake while driving? I'm returning a second one that didn't work out and need a link to one that has shown to work. Thanks in advance!

2-in-1 solution ... and you get to use the cubby for something else.

https://www.amazon.com/gp/product/B0BK4LDMXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[lajlmt]

2-in-1 solution ... and you get to use the cubby for something else.

https://www.amazon.com/gp/product/B0BK4LDMXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I already got the tray holder without.. I am going to wait and try the Orange tray option first and see how flaky that is…

 

[rclee]

2-in-1 solution ... and you get to use the cubby for something else.

https://www.amazon.com/gp/product/B0BK4LDMXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I like this idea, in fact I just ordered one. Thanks for the post.

 

[Bargeld]

Haven't committed to getting a dash mount yet, since I don't use Android Auto and I do use the wireless charger.

But if I do, I will get the ProClip:

https://www.google.com/search?q=pro...APiAwQYACBBiAYBkAYI&sclient=gws-wiz-serp#ip=1

 

[Art Vandelay]

I got this one and I really like it. I use one of these in my Mustang too. I mounted it to the vent on the left side of the steering wheel.
https://www.amazon.com/LISEN-Magnetic-Install-Friendly-Smartphones/dp/B07YRKDF4P?ref_=ast_sto_dp

 

[North1250]

2-in-1 solution ... and you get to use the cubby for something else.

https://www.amazon.com/gp/product/B0BK4LDMXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

wow. That's specific!

 

[North1250]

Haven't committed to getting a dash mount yet, since I don't use Android Auto and I do use the wireless charger.

But if I do, I will get the ProClip:

https://www.google.com/search?q=pro...APiAwQYACBBiAYBkAYI&sclient=gws-wiz-serp#ip=1

I like that, but it's a bit of a reach if I ever have to text while driving.

 

[Paulyz]

What cell phone holder have you purchased that either uses the cubby or is mounted on the dash area, and that doesn't shake while driving? I'm returning a second one that didn't work out and need a link to one that has shown to work. Thanks in advance!

I used a hunk of styrofoam, cut out to fit top cubby tight, cut out a little styrofoam to fit phone mount, then black tape on entire styrofoam. Works good.

 

[Montana]

I used a medium length RAM Mount w/ ball adapter and a magnetic attachment but mainly because it's what I had from a previous vehicle. Secured it to the back of the cubby. I did drill. 3M wasn't cutting it for some reason the same way it did in a previous Escape or my Tacoma.

Similar to what others have done here. I wanted that specific spot though, as close to the screen as I could get. I also got the RAM Mount due to it's use elsewhere and have multiple of them as well as adapters, like for my bike, quad, kayak etc etc. They are universal.

*Edit
I should mention that I have previously tried wireless charging versions of these setups and they were awful. If it was not in the exact spot it would not charge and most of them had very underwhelming magnetic connection which meant over the wrong bump, the phone would shift. So to anyone thinking about it, you can try it, but I've been down that road and have not found one to be reliable. So I stick to the traditional style and route cables as needed.

 

[Gullzway]

I like that, but it's a bit of a reach if I ever have to text while driving.

Lol!

 

[North1250]

2-in-1 solution ... and you get to use the cubby for something else.

https://www.amazon.com/gp/product/B0BK4LDMXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I'm giving this (Type B) a try. I'm just as interested in the expanded holder as the little pocket behind the screen is not particularly useful. Anything in it just slides around. The only time I use it is when I drop the keys in it at the hand car wash.

 

[E30andrew]

Haven't committed to getting a dash mount yet, since I don't use Android Auto and I do use the wireless charger.

But if I do, I will get the ProClip:

https://www.google.com/search?q=pro...APiAwQYACBBiAYBkAYI&sclient=gws-wiz-serp#ip=1

This is pretty slick... really like that it uses a factory screw hole as a mounting point, looks very sturdy.

 

[rclee]

wow. That's specific!

Sorry linked to wrong post.

 

[rclee]

2-in-1 solution ... and you get to use the cubby for something else.

https://www.amazon.com/gp/product/B0BK4LDMXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I got mine yesterday and had it installed in minutes. It actually took longer to remove the film over the tape than actually installing the holder.

Nice fit and the finish matches the Maverick perfectly. Very sturdy mount and neat phone holder. Now we will see how well the tape holds it during the summer.

Sponsored