Trim Tools for hiding Dash Cam Wire

[nunucello]

Hello MTC .... Can anyone recommend the proper type of trim tools I should use to run/hide my front dash cam wire.

Maybe something like this :


or this :


or this :

Thank you very much.

Sponsored

 

[Johnkn]

I have the exact 2nd set. It’s all and more than you’ll ever need. Any of those are just fine.


.

 

[nunucello]

I have the exact 2nd set. It’s all and more than you’ll ever need. Any of those are just fine.


.

Thank You √

 

[Gullzway]

I didn't even need tools. You can just pop them off by hand.

I've had my driver side a pillar off a half dozen times trying to find out what was rattling. Ended up being the window, fixed it when I had my windshield replaced.
Pulled the passenger side off to run my dash cam wiring.

 

[nunucello]

I didn't even need tools. You can just pop them off by hand.

I've had my driver side a pillar off a half dozen times trying to find out what was rattling. Ended up being the window, fixed it when I had my windshield replaced.
Pulled the passenger side off to run my dash cam wiring.

Thank You. Do you have any advice for removing the side A Pillar ?

 

[Gullzway]

Thank You. Do you have any advice for removing the side A Pillar ?

I just pull the weather stripping back a little bit and you can grab the edge of the a pillar and just pull towards the center of the truck. Also pulling on the windshield side.

 

[nunucello]

I just pull the weather stripping back a little bit and you can grab the edge of the a pillar and just pull towards the center of the truck. Also pulling on the windshield side.

Thanks √

 

[LC48]

If you want a local source the Dorman set can be picked up at Autozone or O'Reilly, they work fine and give you plenty of options

 

[nunucello]

If you want a local source the Dorman set can be picked up at Autozone or O'Reilly, they work fine and give you plenty of options

Thank you LC

 

[ClemsonU88]

I didn't even need tools. You can just pop them off by hand.

I've had my driver side a pillar off a half dozen times trying to find out what was rattling. Ended up being the window, fixed it when I had my windshield replaced.
Pulled the passenger side off to run my dash cam wiring.

Dude, you already had your windshield replaced? Was the old one damaged, or did you get a tinted one put on?

 

[Gullzway]

Dude, you already had your windshield replaced? Was the old one damaged, or did you get a tinted one put on?

A rock hit my Windshield on the Highway 12 days after I bought it. The chip was unrepairable and spread about 4 inches after a day. I actually had tinted the one that cracked.
I've put the Aeroskin 2 deflector on since to help avoid rocks in the future.

Sponsored