Katzkin Leather Seat Covers for Maverick

[RonFetty]

Here are some other color options, stitching piping etc. Note that not all of them are are mavs

If these posts helped you. Don’t forget to like (and jokingly subscribe)

Sponsored

 

[Pickles]

If you go to the katzkins site, they will show you some options there of designs that are already common options.

here is an installed one:

Ah i hadn’t seen that video thank you for that. I’ve been binging every design parameter of the katzkin site for weeks now haha

 

[RonFetty]

I was wondering the same.

You remove the old one and this goes over your seat cushions at the same time.

the final portion will usually zip. In between that you need to lock in hog clips so it has that taught look.

I plan to do this, while I am there I will be adding a relay And switch for seat warmer pads

 

[Pickles]

Here are some other color options, stitching piping etc. Note that not all of them are are mavs

If these posts helped you. Don’t forget to like (and jokingly subscribe)

This one wasnt actually… but i gave it a like cuz you put effort into it. Its the specific color matching from the video you send i needed. Thanks for that.

also i see in your bio you slapped the 3.5 from the f150 in your mav? Howd that go? Did you make a thread about it i can check out? I’m not doing it lol just curious

 

[RonFetty]

Another site with similar concept. These will sell you direct.

https://leatherseats.com/shop/build...indmake=Ford&findmodel=Maverick&findyear=2022

The contact I have for katzkins is essentially an installer who is willing to sell the seat without install. So 750-1k vs 2K ish with install. So you only save like 1k if you want to do the job.

 

[RonFetty]

also i see in your bio you slapped the 3.5 from the f150 in your mav? Howd that go? Did you make a thread about it i can check out? I’m not doing it lol just curious

Well, I need ford to send my truck first

 

[Pickles]

Another site with similar concept. These will sell you direct.

https://leatherseats.com/shop/build...indmake=Ford&findmodel=Maverick&findyear=2022

The contact I have for katzkins is essentially an installer who is willing to sell the seat without install. So 750-1k va 2K ish with install. So you only save like 1k if you want to do the job.

I’ll just tack on the canadian website that will supply the same for other’s reference:

canadaseatskins.ca

13-1600ish vs 22-2500 with install in canadian dollarbucks. My specific build would be 1500 from seatskin, and 2200 installed through ford dealer. So i’ll get it installed personally. But now people have the info they need for their own decision

 

[Pickles]

Well, I need ford to send my truck first

Haha oh ok. I was wondering if the shaft and diff would have to be swapped for the power increase. Cuz that 3.5 is like… 450hp and like over 500 torque right? Lol

 

[RonFetty]

Haha oh ok. I was wondering if the shaft and diff would have to be swapped for the power increase. Cuz that 3.5 is like… 450hp and like over 500 torque right? Lol

I won’t f up this thread too much with my plans. In short, First goal is to see what I can get out of it as-is with jb4 etc. if it don’t meet the needs I’ll do the swap.

sleeper is the goal.

it was 20k and can get f150 ecoboost engines super cheap here.

 

[RonFetty]

I’ll just tack on the canadian website that will supply the same for other’s reference:

canadaseatskins.ca

13-1600ish vs 22-2500 with install in canadian dollarbucks. My specific build would be 1500 from seatskin, and 2200 installed through ford dealer. So i’ll get it installed personally. But now people have the info they need for their own decision

For anyone wondering:

 

[Barracuda340]

I screwed around on their site and settled on this color scheme.

 

[Dad]

You remove the old one and this goes over your seat cushions at the same time.

the final portion will usually zip. In between that you need to lock in hog clips so it has that taught look.

I plan to do this, while I am there I will be adding a relay And switch for seat warmer pads

This a great alternative for someone who didn't opt for the Lariat or wants a more custom look. Thanks for passing this along.

Best thing I've done after purchasing the Maverick is joining this club. Great ideas, tips, and people here are super.

 

[Pickles]

I screwed around on their site and settled on this color scheme.

I’ve been messing around with it for my build for a few weeks now. As a disclaimer, i dont do brown interiors. but here’s the options im tossing around. I’m going a bit bolder… i figure if i’m paying for a custom package i want it to look custom. Two are ones i made. one is one of Katzkin’s predesigns for the Mav interior.
As a side note if anyone wants to help me… i dont have my truck lol so id love to know which katzkin grey best matches the carbon fibre regrind panels.

 

[Dad]

I screwed around on their site and settled on this color scheme.

Very rich looking! Much nicer than one would expect with 'covers', but apparently, these are put in place of the OEM fabrics. Please post pictures when completed.

 

[Barracuda340]

Very rich looking! Much nicer than one would expect with 'covers', but apparently, these are put in place of the OEM fabrics. Please post pictures when completed.

I got to get the truck first

Sponsored