ULTIMATE FORSCAN Ford Maverick Spreadsheet (MASTERLIST) 🗒️

[EONR24]

I can gather the evidence, but I should make a video, and it could be lengthy.
When my TSR is off, I receive Pre-Collision warnings when I accelerate behind a car. When my TSR is ON, there is no way to make it appear. I haven't tried to make the Auto-Braking function work, but I no longer receive the alert.

I am one of the individuals in this video, so believe me, I really know how to make the alert appear.

On the other hand, I would love to know what's happening in my truck and my friend's truck. One is a 2022 XLT (4" cluster), and mine is a 2023 XLT (4" cluster). In my other friends' trucks, three more Mavericks 2022 Lariat (6.5" cluster) and two more 2023 Lariat (6.5" cluster) worked perfectly. (We have a small club here in Argentina, so I have LOTS of friends with Mavericks. Also, last Sunday, I programmed the TSR on a Hybrid (6" Cluster).

I Would love to know wich firmware you have in your IPC and IPMA, and also specifically wich options are checked in your Mav, Because maybe... Square signals work different than rounded ones. (But once agian, in my friends 6" this works perfect, in my other friends with 4" pre-collision is alert is not working, no matter if you re-enable it, or if you change sensivity).

Comment, In argentina Overpass signs does not work, becuase in the streets we have a slightly different signs, We tested printing European signs and putting them on the streets, and then Overpass icon appears on IPC.

Have a great Day.

just updated the spreadsheet to reflect the information you provided. Thanks again!

Sponsored

 

[EONR24]

@nicobonis what's your full line of coding for 720-09-01 with TSR enabled?

 

[EONR24]

Seems FCW stands for forward collision warning and searching FCW through the coding can help find what is causing the problem

 

[numike]

I wish I was smarter
I wish I had a windows laptop
I became blurry eyed looking at all this

So I will digest as much of this as I can and later on I will find a local person to forscan my Maverick

 

[numike]

bumping around a number of Ford forums (not Maverick specific) where they discuss forscan There is a heads up be careful when you take your vehicle in for warranty service to the dealer some dealers are by the book when they plug their equipment in and their reading are not 'right' because the vehicle they are servicing has been forscaned you could be jeopardizing/voiding your warranty
And I emphasize some dealers will play hard ball You F'd with the setup The discussion on a couple of local forums was dont take your Maverick to Joeys ford you wont be happy but Petes ford will not have a tizzy if the door ajar warning has been fiddled with As others have written here I will just leave it for some time Once the odomoter fliops over to its second hundrerd thousand miles I may look into it

 

[nicobonis]

@nicobonis what's your full line of coding for 720-09-01 with TSR enabled?

Eon, how are you? Tonight, I'll check it and give you feedback.
Thank you so much for helping me troubleshoot this problem.

 

[nicobonis]

@nicobonis what's your full line of coding for 720-09-01 with TSR enabled?

@nicobonis what's your full line of coding for 720-09-01 with TSR enabled?

Hi EONR24,
Attached, you can see my configurations.

In 720-09-01, I have: 2040 9440 187D.

I think is 1= SLIF disabled * HUDC No Hud * FCWARTTC ON

TSR is working perfectly.
I´m not interested in Over pass signs, but I still have the "bubble" on.


What do you think?

On the other hand, in the BdyCM, "emergency brake light," did you give it a try? does it work?.

thanks friend.
have an awesome night.

Nico

 

[EONR24]

bump

 

[Superg0]

Anyone know what the enhanced engine sound is in the ACM module section? Does it send engine sound through stereo?

 

[EONR24]

Anyone know what the enhanced engine sound is in the ACM module section? Does it send engine sound through stereo?

to my knowledge, there is no fake engine noise on the maverick. The focus ST had something like that called a sound symposer. The Hybrid mavericks by law are required to make a noise at low speed (electric only engine) for pedestrians safety. But yeah on the ecoboost, I am 99% there is no engine noise being fed to into the cabin on purpose.

 

[EONR24]

Anyone know what the enhanced engine sound is in the ACM module section? Does it send engine sound through stereo?

I think I misread your question. I would bet that is a feature available in other Fords after a quick google. I think some f150s and the ford Raptor had enchanted engine sound. I doubt it would work if you turned it on but maybe

 

[SpaceCowboy]

I have a 22 Mav Hybrid Lariat. I used the spreadsheet to active the turn by turn on the small display 6.5" but it only works with an android phone. Is there a setting on my phone or maverick I need to change?

 

[Superg0]

I think I misread your question. I would bet that is a feature available in other Fords after a quick google. I think some f150s and the ford Raptor had enchanted engine sound. I doubt it would work if you turned it on but maybe

Eco boost is already very noisy, but not in a cool listen to this sound. Maybe they can turn it into more pleasant vrooom sound….we can only dream

 

[EONR24]

Eco boost is already very noisy, but not in a cool listen to this sound. Maybe they can turn it into more pleasant vrooom sound….we can only dream

I noticed that it is pretty noisy in general like you said not in a good way lol

 

[EONR24]

I have a 22 Mav Hybrid Lariat. I used the spreadsheet to active the turn by turn on the small display 6.5" but it only works with an android phone. Is there a setting on my phone or maverick I need to change?

Send me what your IPC coding is for 720-05-01 after the change. Also, does your lariat have SYNC 3. apparently sone 2022 Lariats did not have SYNC.

Sponsored