Stuck "In Production"

[jsalewicz]

gosh I wish there was a way to filter out all this production from the feed. I really like this forum but all these "when is my truck going to be done" is wearing me out. There needs to be a sub forum that this chatter can sit and not be shown all the time.
jumps off soap box

Sponsored

 

[Junk]

It is a tracking forum, you don't have to read it

 

[chippermark]

Just to throw in a different point of view - My Lariat was scheduled for the week of January 8, went officially into production on January 12 and there it sat. I got an email on January 18 from Ford saying there was a delay due to "supply chain challenges". As a coincidence I was contacted by a nearby Ford dealer that told me he had a Lariat on his lot that I could have for MSRP. The next day I drove home with a new Lariat!

 

[TheShark]

My '24 hybrid Lariat went into production on 1/23/24 and the modules came alive on 1/24/24, the tracker still just reads in production but I'm assuming most of it is built anyway.

 

[Junk]

As far as I know, the info will just appear in the tables, no need to download the file. Should look something like this... Beyond that I'm not sure what the holdup could be.

Modules.popped overnight around 4am.

 

[jsalewicz]

It is a tracking forum, you don't have to read it

still in my news feed for this site and there are too many of these, I just wish we can turn it off

 

[Stevezx2]

Have you gotten any updates yet? I'm assuming we're both slowed down by the spray in bed liner. I contacted the Ford chat Thursday and they showed mine as received from body company which means it's back at the factory after getting the bedliner. Mine still isn't showing as "built" even though the liner is the last step.

I'm just wondering what is taking so long for my truck to get finally built? It's a Lariat EB FX4 with only two options: the $800 FX4 package and $495 Hot Pepper Red color. It should be very easy to build since the EB's aren't on constraint and I have very little options. Plus, the Lariat for MY24 has the previously optioned safety and luxury package as standard equipment now for less complexity on the assembly line. It was scheduled for production on Jan. 15 with a time stamp of Jan. 19 as the production date on my order tracker. I feel like it should be built at this point. Is this considered normal or am I just being impatient? Not that I need this truck right now since I currently have my nice Maverick but the anticipation is killing me!

 

[MightyMaverick]

Have you gotten any updates yet? I'm assuming we're both slowed down by the spray in bed liner. I contacted the Ford chat Thursday and they showed mine as received from body company which means it's back at the factory after getting the bedliner. Mine still isn't showing as "built" even though the liner is the last step.

I did get an update on January 24 saying that it's taking longer than expected, supply chain issues, yada yada. Ever since then, nothing. Still in production with no built status.

 

[Junk]

Mine has also been stuck in production for 8 days. Have seen the modules pop and they updated the in production from an earlier date to 1/25. So I'm guessing it's back from the body shop. I don't see any ford chat option anywhere though to confirm.

 

[KrisYYC]

Mine has been in production for couple of days now. Yesterday a whole bunch of BCE modules populated but still no PCM modules.

 

[agmonaco]

Mine has also seemingly been stuck in production since even before last week (it moved into production the preceding week).

However, as someone noted, if you check the modules page you can get a glimpse of additional activity. For me, it appears that the modules have been activated and populated, so that's a good sign that the truck is close to completion.

 

[agmonaco]

My Hybrid Lariat just went into production. I do not see any Modules page. Where is that? Thx

 

[Wozdog]

My Hybrid Lariat just went into production. I do not see any Modules page. Where is that? Thx

https://www.motorcraftservice.com/AsBuilt
Mine has been in production for a week my modules haven’t populated

 

[Tbone289]

@agmonaco, enter for VIN here: https://www.motorcraftservice.com/AsBuilt

 

[agmonaco]

@agmonaco, enter for VIN here: https://www.motorcraftservice.com/AsBuilt

What program did you use to open that file? Adobe and word does not work it seems. Or nothing has happened yet.

Sponsored