- First Name
- Edward
- Joined
- Dec 21, 2021
- Threads
- 6
- Messages
- 15
- Reaction score
- 14
- Location
- Lehigh Valley, Pa
- Vehicle(s)
- 2012 Hyundai, Ford Maverick Area 51 AWD
- Engine
- 2.0L EcoBoost
- Thread starter
- #1
Picked up my Area 51 AWD a few weeks ago. Had the Dealer do the bed liner. Nice job except they oversprayed or
? on a bunch of the threaded holes. Some of the bolts that hold the covers on in the bed were not all the way in.
I had to Re-tap most of the Bolts (6MM) and 2 of the Anchors (8MM). Also, the 4 holes on each side for
the DIY anchor rails. Also, 8MM. The Dealer is over 1.5 hours away so I did this myself. I contacted them but never heard back yet! Just an FYI for all who are picking up their Mavs. Merry Christmas/Happy Holidays to all.
? on a bunch of the threaded holes. Some of the bolts that hold the covers on in the bed were not all the way in.
I had to Re-tap most of the Bolts (6MM) and 2 of the Anchors (8MM). Also, the 4 holes on each side for
the DIY anchor rails. Also, 8MM. The Dealer is over 1.5 hours away so I did this myself. I contacted them but never heard back yet! Just an FYI for all who are picking up their Mavs. Merry Christmas/Happy Holidays to all.
Sponsored